b16_destroyer

I have swapped over the entire wiring harness, engine and tranny from a 95 Integra LS into my 87 CRX Si. Everything is working except my turn signals, reverse lights and horn.

I have traced all of the wires down and checked everything with a test light. There is fire coming from the main fuse box but I am not getting fire to the flasher relay that makes the turn signals blink.

Can I put a seperate hot wire to the flasher relay or will that fry my fuse box?

OnYx

it sounds like you have a fuze out. the flashers are on its on fuze as far as i can tell. and as for the swap that has nothing to do with it, this is car wireing not engine

Honda16hb

fuses left me without brake lights, horn, or rear wiper for quite a while so make sure you check all of them, both inside the car and under the hood.

b16_destroyer

I checked all of the fuses and they are good. I checked all of the fuses in and out. Any other suggestions?

J-SMITH69

if all the fuses work? maybe its something to do with the different ecu? like that ecu won't control those thigns

OnYx

the problem is that all the systems he has listed that doent work has nothing ata ll to do with the ECU or the engine wireing. The only thing i can think of it that you have a broken wire somewhere. Its possable that the flasher relay is dead.

b16_destroyer

Problem fixed. It was the Hazard switch. Without that switch plugged in, your turnsignals will not work. It's something how one little switch can cause so many problems.

The entire car now has 95 Integra Wiring. So technically, the only thing 87 on the car is the body. Should be test driving it by this weekend. Will keep you guys posted.

Thanks for the help.