b18b1 into 96 ek now with vid
 

ok so i got the motor in the car and it ran for a few minutes now it wont start. it acts like it wants to start. but doest.

so i have read and read and read.

seeing as its a obd2 motor in a obd2 chassis do i need to do the ckf bypass trick. im using a obd1 ecu chipped with crome.

i have drained the gas tank. put 7 or so gallons of 93 in there.

checked hte fuel filter and it is good.

i have spark and hte injectors a firing also.

i have added grounds in different places. it just doesnt help.

last thing ima do is pull hte harness and buy a new one. so any ideas before i spend more money.

Re: b18b1 into 96 ek
 

and you dont have any CEL's?

Re: b18b1 into 96 ek
 

yea buts its for a vtec. cuz my ls map doesnt do ---- for it for some reason.

also sometimes when i turn the key on hte fuel doesnt prime but then i turn the motor over a few times then cut it off hten back on and hte fuel pump primes. wats up with that. im think ground but ive checked and rechecked them.

about the cel. i started the car about a week ago but it would only rev to 4 k. but as soon as u cut the car off it wouldnt start again. go burn another chip for it it would. now it wont start up at all. only turn over and tease me.

Re: b18b1 into 96 ek
 

21 VTEC spool solenoid valve

thats teh check engine light. fixin to make a short cell vid of wats it doing.

Re: b18b1 into 96 ek
 

http://s43.photobucket.com/albums/e3...0805081557.flv



thatsall i get outta it.

Re: b18b1 into 96 ek now with vid
 

If you get a code for VTAK that means you have a VTAK ecu.

Disable da VTAK.