B18 Rocker arms
 

I bought a 91 Integra for parts to swap into my 90 hatch and i have a couple questions.I yanked the motor out and tore it down to begin rebuilding it but when I took out the cams and removed the headbolts I tipped the head sideways a bit to check hte headgasket out and all the rocker arms fell out. ???So now I don't know what order they were in and I dont want to re-use them as they have a fair amount of wear and I don't imagine my cams would like having them mismatched.Anybody know of a cheap place to get them online?Also what is good to clean pistons with?Last anybody have any recommendations for good rings and bearings?Im thinkin either Honda factory[pretty pricy] or some Hastings and clevite combo etc from the local parts store.It is a stock rebuild with ARP headstuds being the only real upgrades as Im aiming for 300whp so I dont think Ill need much more than a good refreshing of the motor.

Re: B18 Rocker arms
 

or you could just put them all back in where ever you want and then adjust your valves.

Re: B18 Rocker arms
 

yes i agree. or he could line up the marks on the rockers to the cams

Re: B18 Rocker arms
 

Cleaning pistons... you mean the tops of them while they're still in the block?

acetone.

Re: B18 Rocker arms
 

Hmm.Thanks for the responces.Im still deciding what to do.They are expensive to replace [$15 each] so I might instead get the cams reground and not worry about it.What to most people around here use for rings? Ive been looking at Hastings cromoly as they are available from my local shops no shipping but Im not sure what is best to use.Anybody know a good place to find engine parts like oilpumps etc?

Re: B18 Rocker arms
 

www.hondaautomotiveparts.com has OEM parts for cheap. did i mention they are OEM

Re: B18 Rocker arms
 

Sweet :)Thanks man.