b16a in a 91 crx
 

Would someone please give me a parts list minus the motor, tranny and ecu?

My friend has a 91 crx and he wants to drop a b16a in place of his d-15. I was wanting to know what all needs to be purchased.
Thanks

Re:b16a in a 91 crx
 

ok
1 motor mounts (place racing or hasport)
2 shift linkage (place racing or hasport)
3 front crossmember (place racing) i have one it also gives you a 4 th mount and also put in a baby radtior 92-95. you can put a 4 into 1 header and also have room for a downpipe. highly recommend.
4 if you want a hasport wire to hook up vtec or not. optional.

Re:b16a in a 91 crx
 

1) sir front clop
2) mig welder

Re:b16a in a 91 crx
 

sir front the front door front including the glass sunroof.

Re:b16a in a 91 crx
 

its actually somewhat of an easy swap. i put my lsvtec in with no expensive mount kit. i used the integra rear mount, driver side was easy just have something to beat with, transmission and front mount required some fabrication. for linkage just use the ls linkage and modify it. have a mig handy during the whole process. wiring isn't too bad i think it was 5 or so wires for vtec and had to add a 02 wire for the pr3 it runs 2 sensors. my engine sits perfect. no hood clearance probs or anything.

Re:b16a in a 91 crx
 

JDM 91 SIR glass top CRX complete.