Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

b16 question..??

Thread Tools
 
Search this Thread
 
Old Jan 27, 2004 | 10:06 AM
  #1  
90 SiR Hatchie's Avatar
Thread Starter
1.0 BAR
 
Joined: Dec 2003
Posts: 248
Default b16 question..??

Alright guys heres my problem. Doesnt matter what speed i am goin but occasionally when i am cruising at a set speed and try to give it a lil bit of gas to speed up it'll stutter. When i give it alot of gas it'll stutter a sec then come out of it. Im guessing it a type of fuel prob, but not sure where in the fuel system it is. Any suggestions?
Old Jan 27, 2004 | 10:10 AM
  #2  
projekteg's Avatar
3.0 BAR
 
Joined: Apr 2003
Posts: 11,057
Default Re:b16 question..??

have you changed your spark plugs and/or wires lately? fuel filter (i doubt that's it), have you checked out your distributor cap and rotor. almost guarantee it's one of these things, prolly your plugs or wires though.......
Old Jan 27, 2004 | 10:20 AM
  #3  
90 SiR Hatchie's Avatar
Thread Starter
1.0 BAR
 
Joined: Dec 2003
Posts: 248
Default Re:b16 question..??

i'll do that tonight, and keep you posted thanx for the info.
Old Jan 28, 2004 | 06:56 PM
  #4  
crx2fast's Avatar
3.0 BAR
 
Joined: Jan 2004
Posts: 4,730
Default Re:b16 question..??

i have the same problem. but dosent happen all the time. only about 3 times in the past 2 months. i have a new distr. (cap and rotor) and spark plug wires and still does it, when it doese happen i just shut off my car and turn it back on and its fine. i never replaced the spark plugs though. dont care to much about the problem because its not serious-----yet!!!
Old Jan 28, 2004 | 10:14 PM
  #5  
blackman's Avatar
1.0 BAR
 
Joined: Aug 2003
Posts: 399
Default Re:b16 question..??

ya change your plugs and wires and if tht doesn't sto pit check your cap and rotor like dude said. i don't really think it could be the fuel filter .....
pretty sure it is plugs and wires tho.
Old Jan 30, 2004 | 11:07 AM
  #6  
90 SiR Hatchie's Avatar
Thread Starter
1.0 BAR
 
Joined: Dec 2003
Posts: 248
Default Re:b16 question..??

Also when changing a clutch is it absolutely nessasary to change the flywheel also?
Old Jan 30, 2004 | 11:28 AM
  #7  
sohcrxsi's Avatar
1.5 BAR
 
Joined: Dec 2002
Posts: 1,330
Default Re:b16 question..??

you dont need to change it, but you should have it resurfaced, otherwise your new clutch will probably suck, i know mine did.
Old Jan 30, 2004 | 11:49 AM
  #8  
88crxSi's Avatar
3.0 BAR
 
Joined: Feb 2003
Posts: 9,089
Default Re:b16 question..??

my bet is the plugs. atleast check them for cracks and re-gap them.
Old Feb 3, 2004 | 03:12 PM
  #9  
brax90si's Avatar
1.0 BAR
 
Joined: Jan 2003
Posts: 282
Default Re:b16 question..??

are u throwing any codes when it happens? are ur o2 sensors good..there is two if it is first gen
Old Feb 4, 2004 | 05:26 AM
  #10  
projekteg's Avatar
3.0 BAR
 
Joined: Apr 2003
Posts: 11,057
Default Re:b16 question..??

did you figure this out yet?



All times are GMT -5. The time now is 03:10 AM.