b-series swap linkage into ef
12-04-2006, 08:36 AM
#1
1.5 BAR
Thread Starter
Join Date: Feb 2006
Posts: 980
b-series swap linkage into ef
as the title reads, i was just wondering if anyone knew the bolt size that runs thruogh one side of the linkage, going through the bottom of the shifter, and coming back out the other side of the linkage, where a nut meets it to tighten... i lost the bolt on the highway jus now as my linkage dropped to the ground 
12-07-2006, 05:27 PM
#2
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re: b-series swap linkage into ef
I know it's a 12mm head and nut size. Not 100% sure without checking my tap and die set, but I think it's a m8x1.25 pitch. If your shifter is setup anything like mine, there might also be spacer washers to take up any extra side to side space where the linkage bolts to the shifter.
Thread
Thread Starter
Forum
Replies
Last Post
BoostedBSeries
Turbo Parts For Sale
6
04-07-2003 01:12 PM
