B Series Intake Manifolds The Real Deal
 

Well here is a little list with pics and info regarding b series factory intake manifolds


Here we begin with the baller B manifold the B18c1 or GSR. This is a 3 piece manifold and is by far the best flowing B manifold when ported correctly. Lots of work to achieve this and a flowbench rookie's with a dremel tool send it off to a pro. Only gsr manifolds fit on gsr heads


http://img304.imageshack.us/img304/7...fold8oh.th.jpg



Now we move onto the wonderful world of The Integra LS Non Vtec world. From 1990-2001 the LS is the easiest and cheapest B series motor to find. There are some major differences in these manifolds


Starting with the b18a1 the 5 spd and Auto have a different manifold but same bolt pattern. The Automatic has an egr port not found on the 5 spd b18a1 manifolds notice egr port on 1st pic


http://img251.imageshack.us/img251/4...auto8rf.th.jpg


http://img242.imageshack.us/img242/6...bdo52bw.th.jpg

5spd b18a1



http://img251.imageshack.us/img251/8...mani3ne.th.jpg

JDM b18b1 Manifold. This uses a different IACV from the b18a1 along with different fuel rail. All b18 non vtec ls manifolds fit on ls heads and only ls heads


Oh so popular B16a Manifold. There are also minor changes in the b16a from 1989-2000 from IAT change found in OBD2 along with vacuum ports in different areas. Also different fuel rails. Plenum volume also changes between the years but nothing to fuss abou. Again only b16a manifolds fit on b16a heads



http://img304.imageshack.us/img304/1...obdo7vd.th.jpg

obdo jdm b16a manifold


http://img258.imageshack.us/img258/2...obd16am.th.jpg

obd1 jdm b16a manifold



Finally we get to the oh so famous ITR manifold. Large plenum volume 1 piece manifold. Fits b16a and ITR heads only. 64mm factory plenum. Great manifold. Requires obd1+b fuel rail.

http://img248.imageshack.us/img248/6418/itr5yd.th.jpg


Thats it just some good ole info. Enjoy

Re: B Series Intake Manifolds The Real Deal
 

:)

Re: B Series Intake Manifolds The Real Deal
 

Don't forget about the B20B giraffe:
http://hybrid.honda-perf.org/tech/b20/pics/crvvsls.jpg

or the 2-piece B20Z:
http://hybrid.honda-perf.org/tech/b20/pics/b20z2.jpg

http://hybrid.honda-perf.org/tech/b20/b20tech.html

Re: B Series Intake Manifolds The Real Deal
 

Oh ya feel free to add to the thread but correct info. Oh the tall b20 manifold and 56mm tb odd stuff. Thanks whiterice good stuff. Hybrid still rules. :)

Re: B Series Intake Manifolds The Real Deal
 

good info

Re: B Series Intake Manifolds The Real Deal
 

There's also the CTR B16B intake manifold which uses the same P73 casting as the ITR manifold. The CTR has a smaller throttle body and slight difference in a vacuum reference.

P73 casting:

CTR:
http://img258.imageshack.us/img258/3775/ctr035mh.th.jpgITR:
http://img261.imageshack.us/img261/5759/itr033um.th.jpg


CTR has the PCT stamp.
http://img178.imageshack.us/img178/6118/ctr025vo.th.jpg
ITR has the P73 stamp.
http://img458.imageshack.us/img458/8195/itr041ii.th.jpg
See the nipple.
CTR :
http://img258.imageshack.us/img258/776/ctr058yg.th.jpg
ITR:
http://img382.imageshack.us/img382/2227/itr027oo.th.jpg

Re: B Series Intake Manifolds The Real Deal
 

Need to update these lines.

Don't forget about the B17A1 manifold from the 92-93 GSR.
Even though it's OBD-1, it is pretty much the same as the OBD-0 B16 cast with some slight differences.

intake swaps
How about a list of part numbers for the intakes?

92-93 B17A1:17101-P61-A00
94-95 B18C1:17100-P72-000 (part A)
17110-P72-010 (part B)
96-01 B18C1:17100-P72-A00 (part A)
17110-P72-A00 (part B)
94-95 B16A3:17100-P30-G00
96-97 B16A2:17100-P30-A00
99-00 B16A2:17100-P2T-A00

Re: B Series Intake Manifolds The Real Deal
 

Obd1 GSR b17a usdm is almost identical has the obdo JDM b16a minus the shorter IACV port. Same tb.

Re: B Series Intake Manifolds The Real Deal
 

I'd sure like to see the finished product on a correctly ported gsr manifold. I started mine, and then threw it on the shelf because the ribs of the runners on the head side of the break looked impossible to do what I thought I was supposed to.

Re: B Series Intake Manifolds The Real Deal
 

http://img62.imageshack.us/img62/2753/jgmaniqz7.th.jpg




I did one of these awhile ago and it makes great power same work ericks racing and dhracing do also. Basically better like to spend around 15 hours on it.