anyone use a gsr intake on an LS or chopping another junkyard variable length IM
01-31-2008, 06:14 PM
#1
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 1,798
anyone use a gsr intake on an LS or chopping another junkyard variable length IM
I've only found one guy on honda-tech who did it. Has anyone else done this with the GSR IM? I've seen a few of these at the junkyard from various other car manufactures. I'm thinking I might chop one of these and attach it to ls IM for some type of hybrid 
. This motor will not be boosted for a whle so I'm looking for a little NA performance.
I want low end power to mid range with my LS, I dont think its worth spinning past 7000rpm. I figure I would mate a gsr intake manifold to the ls block by redrilling it
I ran across this wiki article and it seems very interesting.
http://en.wikipedia.org/wiki/Variabl...ntake_Manifold
. This motor will not be boosted for a whle so I'm looking for a little NA performance.I want low end power to mid range with my LS, I dont think its worth spinning past 7000rpm. I figure I would mate a gsr intake manifold to the ls block by redrilling it
I ran across this wiki article and it seems very interesting.
http://en.wikipedia.org/wiki/Variabl...ntake_Manifold
01-31-2008, 09:38 PM
#2
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: anyone use a gsr intake on an LS or chopping another junkyard variable lengt
I did it with a b16a years ago but cut the flanges welded the b16a flange to the gsr manifold
then spent alot of time porting the **** out of the manifold about 10+hours
ended up on a low 12 sec all motor ls/vtec
then spent alot of time porting the **** out of the manifold about 10+hours
ended up on a low 12 sec all motor ls/vtec
02-01-2008, 11:08 PM
#3
3.0 BAR
Join Date: Jan 2004
Posts: 5,933
Re: anyone use a gsr intake on an LS or chopping another junkyard variable lengt
a stock GSR manifold makes ---- power.
To get power people port and remove the secondaries; you are just about to do the opposite...
used blox 100bones, WINNAR
To get power people port and remove the secondaries; you are just about to do the opposite...
used blox 100bones, WINNAR
02-01-2008, 11:53 PM
#4
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: anyone use a gsr intake on an LS or chopping another junkyard variable lengt
Originally Posted by Ravage70
a stock GSR manifold makes ---- power.
To get power people port and remove the secondaries; you are just about to do the opposite...
used blox 100bones, WINNAR
To get power people port and remove the secondaries; you are just about to do the opposite...
used blox 100bones, WINNAR
edelbrock
and
aebs typhoon got it right
02-03-2008, 11:34 AM
#6
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 1,798
Re: anyone use a gsr intake on an LS or chopping another junkyard variable lengt
remember guys I dont have a GSR that revs high, I have a LS which dies at 7000. A guy on honda tech actually dyno'd the results. The GSR intake does very well, but at the very top it losses to the aftermarket crowd. I dont have a very top 
.
.
02-03-2008, 03:28 PM
#8
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 1,798
Re: anyone use a gsr intake on an LS or chopping another junkyard variable lengt
its on HT the user name is b19coupe , you can search his posts.
Dont forget with blox you loose too much low end... I know they are cheap
this shows the stock ls and gsr power band
http://www.team-integra.net/sections...?ArticleID=470
Dont forget with blox you loose too much low end... I know they are cheap
this shows the stock ls and gsr power band
http://www.team-integra.net/sections...?ArticleID=470
Thread
Thread Starter
Forum
Replies
Last Post
