anyone make a b motor to d series tranny adapter?
i know theres some sort of b to h series one, why the hell not a d to b motor one? b series trannys are always grinding and expensive..
|
Re: anyone make a b motor to d series tranny adapter?
lol, but the adapter would be more expensive then two trannys. i know the H2B adapters are going from $850-$1350 depending on where yuo get them and the quality.
|
Re: anyone make a b motor to d series tranny adapter?
b motor d trans I belive bisimoto is building one but imo its a waste
cable b trans range from 200 for a basic ls to 600+ for a baller ys1 w/lsd and can be built with tons of custom gearing where the D is very linited |
Re: anyone make a b motor to d series tranny adapter?
Ewww why b motor to d trans? I don't see a point. I hope he's working on a d motor to b trans, considering all of his other work has been sohc.
|
Re: anyone make a b motor to d series tranny adapter?
i read on bisi's site that the D gears are stonger than B gears so they can take more abuse, thats why there is a B>D adapter
|
Re: anyone make a b motor to d series tranny adapter?
if you already have a D trans with aftermarket LSD, id want to keep the D trans too...
|
Re: anyone make a b motor to d series tranny adapter?
Originally Posted by Racintweek
i read on bisi's site that the D gears are stonger than B gears so they can take more abuse, thats why there is a B>D adapter
|
Re: anyone make a b motor to d series tranny adapter?
what axles would you run, cause then you'd just be breaking d series axles if you ran them ;)
|
Re: anyone make a b motor to d series tranny adapter?
Just run cable LS trannies. There's boatloads of these things at the junkyards I go to. I say just break out a bigass drill and make it fit HMT style.
|
Re: anyone make a b motor to d series tranny adapter?
pick up a beat y1 or j1 and rebuild it. it'll end up costing the same a a good used one but it will be fresh
|
Re: anyone make a b motor to d series tranny adapter?
i might pull mine when its nice enough to ride my bike and try to rebuild it, how hard is it? do i need special tools n ----'?
|
Re: anyone make a b motor to d series tranny adapter?
Originally Posted by WTF
i might pull mine when its nice enough to ride my bike and try to rebuild it, how hard is it? do i need special tools n ----'?
|
Re: anyone make a b motor to d series tranny adapter?
Originally Posted by ososlohatch
what axles would you run, cause then you'd just be breaking d series axles if you ran them ;)
|
Re: anyone make a b motor to d series tranny adapter?
bisi's d tranny is a d16a1 tranny....not even the same bolt pattern as a 88-00 civic d tranny
|
Re: anyone make a b motor to d series tranny adapter?
Originally Posted by SunshineSketches
bisi's d tranny is a d16a1 tranny....not even the same bolt pattern as a 88-00 civic d tranny
|
Re: anyone make a b motor to d series tranny adapter?
Originally Posted by WTF
i might pull mine when its nice enough to ride my bike and try to rebuild it, how hard is it? do i need special tools n ----'?
Randy |
All times are GMT -5. The time now is 11:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands