95 CIVIC DX AUTO TO MANUAL
 

some kid has like a half done auto to 5 speed conversion on a 95 civic dx and he cant get it to work he has a d15b7 manual in the car right now and its crooked cause the motor clearly isnt supposed to be in there or something....arent those from like late 80's early 90's crx's ?....im not sure but either way........ so i have a complete z6 swap at my house and the kid wants to buy it if i can finish the auto to manual swap for him......he already has the petals in and the clutch master cylinder and the hard clutch line ran almost to the middle of the fire wall..... the only thing i dont know about is the wiring..... i looked on google and honda tech and all that bull ---- and i cant get a strait answer on what im supposed to be doing....i know how to wire and all that so its no problem i just need to know what needs changed....if any of you guys can help me out or point in the direction of a good write up that would be sweet.....thanks

Re: 95 CIVIC DX AUTO TO MANUAL
 

the motor has the gangster lean because of the receiving mount on the chassis for the mount on the top of the trans. Make sense? Probably not, The metal part of the frame where the mount on the top of the tranny bolts into is different on auto chassis as compared to the manual. You can do one of two things that i know of: Buy a hasport conversion mount. Its bullshit hasport stuff so im sure its $400, or you can get some spacers and put them between the mount and the trans. Not sure how tall they have to be, I'd start with 1/2" or so.

There might be a stock mount off another car that might work instead, thought i heard someone say that at one point but i have no idea what it is.

Re: 95 CIVIC DX AUTO TO MANUAL
 

i did that swap before just rigged up the neutral safty switch on the auto shifter

Re: 95 CIVIC DX AUTO TO MANUAL
 

Ebay has the mount that he needs. A friend of my got one and has had no problem with it at all.

Re: 95 CIVIC DX AUTO TO MANUAL
 

d15b7=92-95 civic dx/lx motor



he needs the mount only way dude

Re: 95 CIVIC DX AUTO TO MANUAL
 

I have a 94dx auto that I converted to manual.

As for the mount, I drilled out the spot welds, removed the bracket from the frame rail, and welded the manual bracket in. You could probably pick one up at a junk yard for cheap.

I still haven't done the wiring, been driving it for over a year with the electric gear indicator from the auto hanging out of the carpet. Its in the park position so it will start (clutch doesn't have to be pushed in). Also no reverse lights unless I move the electric gear switch to reverse. I just don't use them. The reverse lights are an easy fix, there is a sensor on the tranny that gets wired to the gear switch in the floor. If you want to do away with that switch you need to connect the ignition wires (the big fat ones), or wire in a relay to the clutch switch.

If your ecu is an auto, their is a good write up on pgmfi.org to convert to manual. Its pretty simple

Hope this helps

Re: 95 CIVIC DX AUTO TO MANUAL
 

word