88-91 engine in 92-95 wiring question.
 

where i baught my last engine from "nippon-motors.com" only has a 88-91 sohc zc in stock, my question is if i break it down to a long block and use the 94 assesories will the sensors in the back of the engine hook right up to the 94's harness? its a d15b7 wit a blown head gasket, got it cheap. also if i buy a new clutch kit an flywheel, should i buy for a 88-91 or 92-95 i searched and they seem the same, just need that assumtion hmt approved. i know ill have to enlong one bolt hole for the power steering, but is there anthing else i should look for, i work six days a week and will not do this myself this time, before it was a 88-91 in a 91, thanks for the ecu "1991civicsi". just thaught id ask real quick before i ran off to work, the fag at the performance shop couldnt answer me, "my boss isnt in right now" didnt know they had guy reseoptionists "cant spell".

Re: 88-91 engine in 92-95 wiring question.
 

Might want to try this in the hybrid/tech section....

Re: 88-91 engine in 92-95 wiring question.
 

Your harness should work without changing the intake manifold and stuff like that. the only swap you will have to do is your dizzy. As for the clutch, get the clutch/flywheel that goes with the year of the trans and model of the old engine. but since its a 94 you just get an 92-00 clutch kit and 92-00 flywheel.

Re: 88-91 engine in 92-95 wiring question.
 

wouldnt he have to swap the injectors also? i was thinking just dizzy and injectors maybe swap over tb if its got a tb mounted map oh and of course the clutch ---- thats already been stated above

Re: 88-91 engine in 92-95 wiring question.
 

don't forget the fan switch :)

Re: 88-91 engine in 92-95 wiring question.
 

oh yes! you can do one of two things, lengthen that wire or run the thermo housing off your old motor.

Re: 88-91 engine in 92-95 wiring question.
 

;)

Re: 88-91 engine in 92-95 wiring question.
 

yea imma use the 94 tranny with the 88-91 engine, if the splines are the same i assume i can use either year group. i guess ill get the ebay combo - exedy_fidanza. i was reallly curious about the sensors on the back of the 88-91 block, if the connectors are the same. never had a [eg] before but have had a few d-series in my [ef] hatch. was told that the only mod from nippon-motors was extending the power steering bolt hole, but i assume there are a few differances between the two. thanks for the input so far guys, imma do some more searching and ill call redline in the morning before work to speak to phong. got to love the asains,,,,,,,they'll hook it up, just dont want my ass reamed for labor when in reality it would only take me a couple days at my old shop to do myself, but i left on bad terms, fuckn born again christians cant take a fuckn joke....as for porn i cant seem to figure it out so here are a couple sites to get some trailers and pics from - realitykings.com - bangbros.com...much love hmt folk...........stop bitching an boost it..........im rich bitch....... O0

Re: 88-91 engine in 92-95 wiring question.
 

redline...... phong......... Now i know your in dallas run far far away from that ------- shop unless hes hooking it up really well...

Re: 88-91 engine in 92-95 wiring question.
 

yep redline is in arlington, they did my timing belt/water pump and valve lash last year, there not reputable? ??? any place you can recommend? other than them i did it all myself on my hatch, this eg is for the fam - i need a four door for the kids....so i work my ass off an cant do it myself this time. any place that kicks ass let me know man, much appreciated....