HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   81.5mm bore, can I still use an oem headgasket? (https://www.homemadeturbo.com/hybrid-tech-8/81-5mm-bore-can-i-still-use-oem-headgasket-93434/)

reactone 07-09-2008 05:08 PM

81.5mm bore, can I still use an oem headgasket?
 
Hi,
I will be building a new block in the upcoming weeks, and I want to know if I can use a stock bore 81mm headgasket on a block bored out to 81.5. I thought that I had read here a while back that its ok. I don't want to buy another Cometic if I can help it, and Honda doesn't list overbored hgs (I looked at Majestic)
Thanks

Nate 07-10-2008 01:39 AM

Re: 81.5mm bore, can I still use an oem headgasket?
 
Yeah I think your good.

boosted 00 black si 07-10-2008 11:37 AM

Re: 81.5mm bore, can I still use an oem headgasket?
 
yeah u could i got 81.5mm on my block and i use a stock head gasket from honda

reactone 07-10-2008 05:33 PM

Re: 81.5mm bore, can I still use an oem headgasket?
 
good, I've had no problems with my cometic but I've read about many horror stories.
Plus they're 90 bucks.

nascarfan 07-10-2008 11:07 PM

Re: 81.5mm bore, can I still use an oem headgasket?
 
yes i believe oem headgaskets are 2mm oversized correct me if im wrong, but ebay gaskets son, 40 dollars full kit shipped and probably come from the same ching chong meow factory as felpro

BigBird 07-11-2008 03:47 AM

Re: 81.5mm bore, can I still use an oem headgasket?
 
I'm using an 81mm but it hasn't run yet so i can't actually say but it sure looks fine.

reactone 07-14-2008 04:01 PM

Re: 81.5mm bore, can I still use an oem headgasket?
 

Originally Posted by civiceggturbo
yes i believe oem headgaskets are 2mm oversized correct me if im wrong, but ebay gaskets son, 40 dollars full kit shipped and probably come from the same ching chong meow factory as felpro

Eh, normally I would go this route (we are using ebay kit on my brothers Vitara'd Z6) but this is going on my built Ls/Vtec w/Holset. I only want to replace it once.
But you are right, the HG actually looks pretty damn good for a cheapie kit. I was surprised.

-SKUM- 07-14-2008 04:11 PM

Re: 81.5mm bore, can I still use an oem headgasket?
 

Originally Posted by reactone
Eh, normally I would go this route (we are using ebay kit on my brothers Vitara'd Z6) but this is going on my built Ls/Vtec w/Holset. I only want to replace it once.
But you are right, the HG actually looks pretty damn good for a cheapie kit. I was surprised.

I got a good ol ching chong gasket set off of ebay, and I looked at the hg and said "I think I will go get a felpro" I got the felpro and it was the same damn gasket....... overall I was impressed with the ebay kit I got.

nascarfan 07-15-2008 12:14 AM

Re: 81.5mm bore, can I still use an oem headgasket?
 
i just bought another ebay gasket kit for my ls (name brand O0.... evergreen automotive) usually its kabuki but its all the same ---- and evergreen sounds tits

-SKUM- 07-15-2008 01:32 AM

Re: 81.5mm bore, can I still use an oem headgasket?
 

Originally Posted by civiceggturbo
i just bought another ebay gasket kit for my ls (name brand O0.... evergreen automotive) usually its kabuki but its all the same ---- and evergreen sounds tits


the one I got was evergreen automtive too. SO far I have 4 minits of run time on it. It hasent leaked yet...... :D


All times are GMT -5. The time now is 02:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands