HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   1g crx engine swap (https://www.homemadeturbo.com/hybrid-tech-8/1g-crx-engine-swap-10170/)

fatrhino 09-28-2003 12:58 PM

1g crx engine swap
 
I am hopefully picking up 2 first generation (one 87 and one 86) CRX's this week for $500. I am trying to decide which engine to swap in and turbo. I am trying to decide between the d16a1 and the d16z6. I think the d16a1 would be easiest because it is a direct bolt in. but since the d16a1 is obd0, does that mean i can't use uberdata? basically i am just wondering which swap would be easier/more logical.

1337 09-28-2003 04:06 PM

Re:1g crx engine swap
 
you can run ghetto dyne or that new turbo edit but it all depends on the ecu you run. Im thinking about doing a mini me on a d15b2 86 hf z6 head with 2nd gen crx si intake but i dont know if the head fits i have yet to look at the top of the block

fatrhino 09-28-2003 04:09 PM

Re:1g crx engine swap
 
you've got an 86 hf? does anyone else have a 1g crx? definitely a minority around here

nyc86zc 09-28-2003 04:54 PM

Re:1g crx engine swap
 
I got a first gen too. I think semnos still has one, but not sure.

I'd say go with the d16a1. It's the easiest and you can find them fairly cheap. Fuel management may be a problem if you are looking at zdyne or haltech etc.
I'm using an SDS EIC and msd btm6al setup.

Here is a pic of mine:
http://www.imagestation.com/picture/...5/fcf5a98b.jpg

fatrhino 09-28-2003 06:54 PM

Re:1g crx engine swap
 
got any more pics of your crx? have you run it on a dyno?

fatrhino 09-30-2003 07:20 PM

Re:1g crx engine swap
 
will a d16z6 bolt right in, or will i need different mounts?

1337 09-30-2003 08:39 PM

Re:1g crx engine swap
 
mounts

Semnos 10-01-2003 05:08 AM

Re:1g crx engine swap
 
Nice Nyc86ZC.
You got yours boosted :o .
That looks exactly like mine engine bay except for all those wires :) .I got to fix mine...I'm selling it :( .
Got me a 2nd gen..do you know that the PJ1 ECU can be chipped...the fuel map can be tuned with the older version of ghettodyne or with OBDOEDIT. I was gonna do that, but I blew a gasket and a lot of bad things happened afterwards.
Anyways post some numbers.. ;D

fast2camciv 10-01-2003 07:24 AM

Re:1g crx engine swap
 
yea nyc86zc post some more pics, describe your set-up. im very interested i just bought an 85 si that im putting my built d16a1 in. i ran a 13.0 in the orig 87 integ last year on nos. now im going turbo. post info or email it to me.thanxz

fatrhino 10-01-2003 06:26 PM

Re:1g crx engine swap
 
hey fas2camciv where do you live?


All times are GMT -5. The time now is 06:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands