Re: ***ATTN*** overheating problem on filled block....FIXED
good to hear, my hope is now restored in the block filling method ;).
what fan are you runnign and is it a stock thermostat? |
Re: ***ATTN*** overheating problem on filled block....FIXED
talk about to much cooling
|
Re: ***ATTN*** overheating problem on filled block....FIXED
Originally Posted by Ravage70
talk about to much cooling
Why not run a gutted t-stat? |
Re: ***ATTN*** overheating problem on filled block....FIXED
good to hear things are well...
Still waiting to hear from the other block filled block and its progress... |
Re: ***ATTN*** overheating problem on filled block....FIXED
bro u prob had the same problem i did when i put my lsvtec in, the top hose was cold and the bottom was hot, and me being a dumb kitted out nigga i had the hoses to the heater core backwards so it was flowing the wrong way. switched them back and woot woot the bitch never heated up again and i didnt even use a fan.
|
Re: ***ATTN*** overheating problem on filled block....FIXED
What rad/ fan setup are you using. Also from above, If you not using a heater core(ie: it leaked so I bypassed it till it gets fixed) what affect would this have?
|
All times are GMT -5. The time now is 09:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands