ZC engine ....help :(
My ZC swap is not runngin right. I have replaced the timing belt gave it a basic tune up and this is what i got. Stock zc with a intake. It misses(feels like it shuts off actually) right at 2100 like clock work. ABove or below that rpm it runs great. under light throttle however between say 2700-3300 it feels like it is hesitatin and missing, almost like hitting a fuel cut. any sensors....or anythign i could have missed? please help me!
|
Re:ZC engine ....help :(
what car/year/model
what ecu |
Re:ZC engine ....help :(
1988 crx si i know i need the pg7 ecu but i have been running the stock one for like 12k miles and it has been fine up till now!
|
Re:ZC engine ....help :(
is it throwing any CEL's?
I had the same problem with a B20 swap, and I noticed that if I left the tank under 1/4 full it would do it. Keep more fuel in it, and no problems.....could be a vapor problem, I dont know, but I just keep it around 1/2 tank and im fine. BTW, this should go into the hybrid/tech section. ask a mod to move it. Welcome to HMT.com! |
Re:ZC engine ....help :(
scaaeg, hmt.com is:
http://www.hmt.com/images/HMTlogo.gif This is homemadeturbo.com Don't confuse the newbs! ;) |
Re:ZC engine ....help :(
???
|
Re:ZC engine ....help :(
Sup byatch!
|
Re:ZC engine ....help :(
Originally Posted by REVS29K
1988 crx si i know i need the pg7 ecu but i have been running the stock one for like 12k miles and it has been fine up till now!
|
Re:ZC engine ....help :(
everything was fine up till this. AFter this started i changed the fuel filter...no effect.....adjusted the timing....no effect....changed the cap/rotor/wires/plugs...no effect.....then my timing belt blew.....slapped a new one on there...no bent valves....same problem though....I am at a total loss for what could be happening...:( oh i ran two tanks of heavy fuel system cleaner through the car as well...no effect1 :(
I have a new fuel pump, i need to install it though i thought that might be causeing this(what do you think?) it is strange because it is totally RPM dependant! |
Re:ZC engine ....help :(
Originally Posted by sccaeg
is it throwing any CEL's?
I had the same problem with a B20 swap, and I noticed that if I left the tank under 1/4 full it would do it. Keep more fuel in it, and no problems.....could be a vapor problem, I dont know, but I just keep it around 1/2 tank and im fine. Welcome to HMT.com! |
All times are GMT -5. The time now is 03:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands