WTF to do?
 

on my crx turbo its too large i've had to cut and fab places for the radiator to sit, i had to switch to a civic raditor make my own brackets that lowered the radiator. no the DP is in the way so ---- wont fit , i think im going to the junk yard to find a small radiator from something to get it to fit, i measured it, it needs to be like 14x14 to fit in there good, anyone have any sugestions?

Re:WTF to do?
 

is it a completely custom dp or do you have one of those stock cast elbows on there? if so ------ cut that ----, get a flange and a mandrel bend and make yer own dp...

what turbo is it?

Might want to look into getting a custom front cross member

Re:WTF to do?
 

ya i've been looking at jim fab bars, prob be buying one soon, i can ------ rig the radiator in there though.

Re:WTF to do?
 

what body is this, motor and turbo and manifold style?

Re:WTF to do?
 

89 crx si, d16z6 t3t4 turbo, supported by the ever so famous ssautofuckers. its like that pile of trash manifold hold the turbo out too far.

Re:WTF to do?
 

lol

well what about the downpipe? is it a custom downpipe... you should beable to squeeze it by the cross member...

Re:WTF to do?
 

o no i can get it by the cross member bro, its the radiator is being a -----. i've already made brackets and lowered it,it worked great til i put the turbo up there and the exhaust flange is shuved into the side of the radiator.

Re:WTF to do?
 

post a pic because that doesnt make too much sense that the dp is hitting the rad really...you arent using that shitty one that ssauto gives you right?

Re:WTF to do?
 

i had almost the same problem with my last kit. i had to cut alot off the crossmember by the passenger headlight to squeeze it in there and drill out the rad bottom supports and reweld them about an inch and a half over. it sucked but it turned out pretty good.

just cut that bitch up until it fits ;)

Re:WTF to do?
 

ya jeff same here i cut the ---- out the cross member so now im buying a jim fab, but until then the civic rad it too big, the turbo sits too far out it is right in the radiator, sry i dont have pics.

Re:WTF to do?
 

what DP are you using? i know muffler bandit will make a new one for around $60

Re:WTF to do?
 

ya today im going to bonnynClydes around noon or so, its a red crx stop in there and ill show you whats up with it if you want.

Re:WTF to do?
 

i would but i have to work right when i get out of school.

Re:WTF to do?
 

i just called muffler bandit bro they said no. im like WTF you cannot even make a single bend, jesus.

Re:WTF to do?
 

thats where i got my last one made ???, so what happened yesterday? get it fixxed?

Re:WTF to do?
 

ya i figured out my timing was off so thats y it was mostly running like ----, i coulndt get my dp and charge pipes made though, i think im going today, they should be able to bend me innercooler pipes huh? i dont care if they are crush bent or not just want that bitch on there.

Re:WTF to do?
 

what kind of IC are you running? it would have been easier to just buy some mandrel bends online and cut them yourself and either use a ---- load of couplers or weld them.

Re:WTF to do?
 

did you ever get those pipes? i might have an extra "U" left over after i'm done.

Re:WTF to do?
 

ya they r getting done right now. should be boosting tonight.