|
Re: Wow is this guy serious? (Egay)
Originally Posted by SinisterCRX
Originally Posted by LSD Motorsports
Id rather buy a Saturn :-\
On a side note, I saw a "fully built" 12.X:1 compression honda b18 dart block in summit magazine for $13k. Ouch. I believe thats what they were charging orginally some company had those crat motors I think there down to 9 g's. |
Re: Wow is this guy serious? (Egay)
High 8's I thought.
Trav-ASS's 2.0/VTEC was built for a little less than half that by RLZ. Sleeves, Eagles/Wisecos, Ferrea valves, some misc goodies. They took a minute about it, but who would you rather trust? Aside from your own brain and two hands, that is. |
Re: Wow is this guy serious? (Egay)
is it me or what but he says that it will have 350hp with out turbo but its set up for turbo there for it would be low comp therefor not having 350hp right? and i think it would accutaly sell if he put it in the rex but sucks to b him
|
Re: Wow is this guy serious? (Egay)
Hell, you want to do it yourself, gsrswapandstfu's 2.1 liter NA engine with the super light Carillo A-beams, strutted pistons, Eric Aguilar's old 92 mm crank, RLZ stage "3" cams, etc, only cost him $5K in parts. That was some bling----- high dollar NA stuff, regular run of the mill heavy forgings for turbo use are lots cheaper.
|
Re: Wow is this guy serious? (Egay)
I`d spend 13000 on 10 different colored ef hatch and ran him over.
lol i meant 10 ef in 10 different color |
Re: Wow is this guy serious? (Egay)
Originally Posted by Joseph Davis
Hell, you want to do it yourself, gsrswapandstfu's 2.1 liter NA engine with the super light Carillo A-beams, strutted pistons, Eric Aguilar's old 92 mm crank, RLZ stage "3" cams, etc, only cost him $5K in parts. That was some bling----- high dollar NA stuff, regular run of the mill heavy forgings for turbo use are lots cheaper.
Originally Posted by Donald125
I`d spend 13000 on 10 different colored ef hatch and ran him over.
http://img128.imageshack.us/img128/9...00270qs.th.jpg http://img188.imageshack.us/img188/6...00247tn.th.jpg And dont forget the rust ;) |
Re: Wow is this guy serious? (Egay)
Originally Posted by 89sipimpin
Originally Posted by AgentMurdoc
the valve cover alone is worth it, you guys are crazy, I'm gonna take out a loan for this.
|
Re: Wow is this guy serious? (Egay)
---- that noise
|
Re: Wow is this guy serious? (Egay)
Originally Posted by BoosTedZSix
Originally Posted by 89sipimpin
Originally Posted by AgentMurdoc
the valve cover alone is worth it, you guys are crazy, I'm gonna take out a loan for this.
|
Re: Wow is this guy serious? (Egay)
Originally Posted by SinisterCRX
Originally Posted by Joseph Davis
Hell, you want to do it yourself, gsrswapandstfu's 2.1 liter NA engine with the super light Carillo A-beams, strutted pistons, Eric Aguilar's old 92 mm crank, RLZ stage "3" cams, etc, only cost him $5K in parts. That was some bling----- high dollar NA stuff, regular run of the mill heavy forgings for turbo use are lots cheaper.
He only got 215 whp, but it still had stock throttlebody and an ebay header (STR 70mm kept sticking, and AN-R broke off at the collector). Torque was either 148 or 158 ft/lbs, I forget, until the TB and header choked it down. Should have been a solid 250 whp NA ride. http://www.redpepperracing.com/galle.../aah.sized.jpg Test pipe says "Sponsored by Endyn" http://www.redpepperracing.com/galle.../aaj.sized.jpg Can't really see it, but it has T-Bone from HT's old sheet metal intake on it. I just realized I don't really have any good pictures of the car... took more with a bunch of turbo parts in front of it than of the actual car... it was a slow faggot NA car, anyway. I mean, 250 whp? That's like a stock SOHC with a HMT T3 and some balls. http://www.redpepperracing.com/galle.../aak.sized.jpg :) |
| All times are GMT -5. The time now is 03:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands