would this turbo spool good enough for me....
Ok well i havent taken a look at the turbo yet in person, but this is pretty much what the seller had to say about it.....Just how big is it? what kinda spool if any would i get on my stock block ls? Just trying to figure out if I should pick it up ;)
Its a full T4 turbo that uses a 57trim compressor. This compressor will support 500 flywheel horsepower. Its a full garrett turbo, and is in great shape. No shaft play. The turbine side is a T4 flange, with a rather large A/R (for more top end power, race car kinda stuff, maybe nitrous). Full T4 turbine wheel. The front cover A/R is a .60. 3 inch inlet, 2 inch outlet. 4 bolt pattern discharge on the turbine, and the turbine housing is a spilt pulse entry design Well I had him bring it over today, I can pick it up for $300, its in damn good shape, heres some pics ;) Now let me hear some opinions, I have a bmc t3 log mani, so i would prolly have to use an adapter plate....its plate says its a T04E http://is.rely.net/1-1116-33357-t-1w...Dg8b1qQXrA.jpghttp://is.rely.net/1-1116-33358-t-cl...qFAKN68LCA.jpghttp://is.rely.net/1-1116-33359-t-OG...bvdmuUm7Iw.jpghttp://is.rely.net/1-1116-33360-t-4U...8k5h0E5Vuw.jpg |
Re: would this turbo spool good enough for me....
on what motor. if its a stock block ls or some ----, forget it
|
Re: would this turbo spool good enough for me....
Originally Posted by B18TurboEF
what kinda spool if any would i get on my stock block ls?
|
Re: would this turbo spool good enough for me....
maybe with a 50 shot to spool it, the ls head doesnt flow well at all, the turbo is huge, and your motor dioesnt rev to utilize the massive top end rush that turbo would provide. i say pass.
|
Re: would this turbo spool good enough for me....
so on an ls-vtec do you think you could actually utilize it? its a street car and i really dont want boost for like 2krpm, that would just suck
|
Re: would this turbo spool good enough for me....
you might spool that turbo..... never
|
Re: would this turbo spool good enough for me....
I wouldn't listen to hotrex, hes not very optimistic. Before you count that turbo down and out I'd add a tube running from the exhaust mani to your cockpit and when you need boost, just blow into it as hard as possible. Or get a T3/T04.
|
Re: would this turbo spool good enough for me....
its split pulse
build a mani for it and ull spool on an ls-vtec doesnt sound that big id run it u can even block off one of the exhaust turbine holes if its that big |
Re: would this turbo spool good enough for me....
block off a scroll and it will spool that bitch 8)
|
Re: would this turbo spool good enough for me....
id like to build a twin scroll collected mani
|
Re: would this turbo spool good enough for me....
Originally Posted by rawr
block off a scroll and it will spool that bitch 8)
|
Re: would this turbo spool good enough for me....
he told me the bitch would only spool 15 psi even with the wastegate totally disabled.
|
Re: would this turbo spool good enough for me....
Originally Posted by hotrex
he told me the bitch would only spool 15 psi even with the wastegate totally disabled.
before he pulled the turbo off to test the ss auto units he said he was pushing over 20psi. |
Re: would this turbo spool good enough for me....
well thats some good stuff to hear, now theres pics so lmk whatcha think ;)
|
Re: would this turbo spool good enough for me....
???
|
Re: would this turbo spool good enough for me....
buy it, save it or sell it for more.
|
Re: would this turbo spool good enough for me....
abit big aye.. but its a twin scroll, so youd need a twin scroll manifold..we ran a t3t4 twin scroll, looked same as that, on a 1600 4agze and had full boost 18psi by 4750. then we ran the same turbo on a rb20det without the twin scroll mani and it didnt get boost until 6000.
|
All times are GMT -5. The time now is 04:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands