Would this be sufficient for cutting exhaust and intercooler piping?
 

I'm a cheap bastard. I know I'd have to rotate the piping as I cut it but I've been using an angle grinder so anything is an improvement.
http://www.harborfreight.com/cpi/cta...emnumber=42307

This is on sale too, but I'm broke as a joke.
http://www.harborfreight.com/cpi/cta...emnumber=44829

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

get the 14"

i had to cut whitey bends with a ------- angle grinder because i was cheap. needless to say, they weren't the cleanest or straightest cuts :)

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

Dang, just spring for the chop saw, bandsaw, or sawzall. Any of those three will do a good job, and are more versatile than the two you showed.

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

hmmm, sawzall. Havent really thought of that. The allure of the cutoff saw would be a perfect cut making it easier to weld cuz theres no gaps. Can you get nice cuts with a sawzall? HF has them for $20. Cant beat that.

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

That first thing would not even cut the pipe, an angle grinder would be better than that. The chop saw is cool though

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

---- if your hella strapped for cash just buy a hack saw and do that ---- by hand O0

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

Good idea but...im weak. I did 1 and said 'never again'

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

If your on a budget go with a chop saw that has a vice on it. If your a man you'll get a cold cut saw like me ;D

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

you can get a cheapo 14 inch chop unit for like 60 bucks.. i picked up my adjustable 10 inch makita unit at a pawn shop for 35

Re: Would this be sufficient for cutting exhaust and intercooler piping?
 

^^ ---- ya, i was gona say hit up your local swap meat i guarntee you will find something for $30 or less. Chances are its gona be some off brand one but hey, it least you will get THIS job done without it freaking out on you O0