Who makes DA traction bar/crossmember?
Been searchin around a lil bit and all i've seen so far for the DA was Fullrace and Z10 and that shits expensive, and this other one on ebay for like 250 ish. Any other ppl makin em? I know JK makes em for ef's and ----, but whose got that young DA ----? I wanna get a 7 inch downpipe in my bay for my madd gangsta t25! Thanks niggaz
|
Re: Who makes DA traction bar/crossmember?
HAHA 7" on t25.
No I don't make one. I would like too, but I have never been able to find a test car in my area. I may have more luck come this spring. The only problem i I like to have a Jig that is actually the car when I fab them. 92-00 isn't so bad because no other bolts other then the tow hook need to line up, unlike a EF, DA or CB. That why my EF Jig is the front of a Car torched off from the wreckers. My jig and fixture costs would be really high if I had to do that for DAs and CBs. |
Re: Who makes DA traction bar/crossmember?
you didnt look to hard found this in less than 30 seconds http://cgi.ebay.com/ebaymotors/90-93...spagenameZWDVW
|
Re: Who makes DA traction bar/crossmember?
Originally Posted by ososlohatch
you didnt look to hard found this in less than 30 seconds http://cgi.ebay.com/ebaymotors/90-93...spagenameZWDVW
|
Re: Who makes DA traction bar/crossmember?
I think I am going to pick that one up. I just messaged them about a warrenty on them, as I didn't see any in the description. Those will be awesome.
|
Re: Who makes DA traction bar/crossmember?
MM, Never hear dof these guys and they are only 2.5hrs away from me. I've seen all those cars at Import Drag Days.
Not to bash them but the only problem I see is the in-ability to adjust the radius rods on the car. |
Re: Who makes DA traction bar/crossmember?
Originally Posted by bumblezc
MM, Never hear dof these guys and they are only 2.5hrs away from me. I've seen all those cars at Import Drag Days.
Not to bash them but the only problem I see is the in-ability to adjust the radius rods on the car. |
Re: Who makes DA traction bar/crossmember?
Originally Posted by bumblezc
MM, Never hear dof these guys and they are only 2.5hrs away from me. I've seen all those cars at Import Drag Days.
Not to bash them but the only problem I see is the in-ability to adjust the radius rods on the car. |
Re: Who makes DA traction bar/crossmember?
Yes, but you must un-bolt them from the LCA in-order to adjust.
A better design use 2 heims (1 LH and 1 RH) so that all the user does is loose the jam nuts and turns the rod. |
Re: Who makes DA traction bar/crossmember?
lol it takes like 5 min you loose'n 4 bolts,then adjust the bolts on the radius rod
|
Re: Who makes DA traction bar/crossmember?
or you can just take the 2 bolts out of the heims to adjust... anyway looking at that design it doesn't look like it is going to leave much clearance between the block and the crossmember... you'll notice it bolts up to the same place your factory one bolts to and goes straight across. other designs bolt to and drop down from the tow hooks allowing much more clearance for that 7"er you're talkin about.
|
Re: Who makes DA traction bar/crossmember?
Originally Posted by ososlohatch
lol it takes like 5 min you loose'n 4 bolts,then adjust the bolts on the radius rod
_ | _ | :) maybe you just turn the nut on the end and it pulls the arm in and out? |
Re: Who makes DA traction bar/crossmember?
what do u do with the horizontal crossmember, the one that attachs from the big crossmember down to the steering area.
I dont have that in right now and i dont notice any diffence. |
Re: Who makes DA traction bar/crossmember?
:o thats not good
|
Re: Who makes DA traction bar/crossmember?
im def gonna pick one up. Why would u need to adjust those damn things? U can adjust them on the OEM?
|
Re: Who makes DA traction bar/crossmember?
Adjusting a Crossmember comes into to play when your Actually making enough power to require one for anything more then added space.
When you get into preloading FWD suspension or adusting you Caster you will know the difference. Again with this design you are only getting 180deg adjustments like crx88si said. I'm not bashing these guys, I have seen there cars in person, and possibly even talked the shop owners? Plus they are the only ones at this moment offering a DA traction bar at sub-$350. |
Re: Who makes DA traction bar/crossmember?
Originally Posted by ComptonsF1NEST
what do u do with the horizontal crossmember, the one that attachs from the big crossmember down to the steering area.
I dont have that in right now and i dont notice any diffence.
Originally Posted by ososlohatch
:o thats not good
|
Re: Who makes DA traction bar/crossmember?
Originally Posted by ososlohatch
you didnt look to hard found this in less than 30 seconds http://cgi.ebay.com/ebaymotors/90-93...spagenameZWDVW
I was just concerned at the quality of it. I mean, you can buy a lot of ---- off ebay, and a lot of times it turns out to be ebay quality. A Crossmember is not something i would like to have fail so i was curious as to whether or not anyone else had used one or know anything about its quality or any other makers. Thanks so far for the responses folks, i'll probably end up getting one unless somebody else wants to be the HMT test dummy. |
Re: Who makes DA traction bar/crossmember?
Originally Posted by Castor Troy
other designs bolt to and drop down from the tow hooks allowing much more clearance for that 7"er you're talkin about.
|
Re: Who makes DA traction bar/crossmember?
some1 buy one and try it out.
|
Re: Who makes DA traction bar/crossmember?
Originally Posted by 89sipimpin
If you'd have actually read what i posted you'd have noticed that i had spotted that one out already. :-*
I was just concerned at the quality of it. I mean, you can buy a lot of ---- off ebay, and a lot of times it turns out to be ebay quality. A Crossmember is not something i would like to have fail so i was curious as to whether or not anyone else had used one or know anything about its quality or any other makers. Thanks so far for the responses folks, i'll probably end up getting one unless somebody else wants to be the HMT test dummy. |
Re: Who makes DA traction bar/crossmember?
Hmm, that makes me a little more comfortable. I gotta see whatsup with my finances and i'll let u guys know if i get it. If someone else gets it first post back wit results!
|
Re: Who makes DA traction bar/crossmember?
Originally Posted by NBLKID
yea but when i ordered my lcons that mounted to the tow hooks, i went to mount it and all the welded nuts on the other side of the tow hook snapped off, the only option was to cut out the frame to get to it to put other nuts on or weld the bitch in, i ended up just putten em to the side because one of the threads got fucked up on the radius rod, anyway the tow hook mounting spot can be a bitch sometimes depending how old your car is or how good those stock tow hook nuts are welded on
Originally Posted by 89sipimpin
If you'd have actually read what i posted you'd have noticed that i had spotted that one out already. :-*
I was just concerned at the quality of it. I mean, you can buy a lot of ---- off ebay, and a lot of times it turns out to be ebay quality. A Crossmember is not something i would like to have fail so i was curious as to whether or not anyone else had used one or know anything about its quality or any other makers. Thanks so far for the responses folks, i'll probably end up getting one unless somebody else wants to be the HMT test dummy. |
Re: Who makes DA traction bar/crossmember?
Innovative also makes em for a CRX, dont they fit the DA also?
|
Re: Who makes DA traction bar/crossmember?
|
All times are GMT -5. The time now is 04:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands