HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Where to get some 12v LEDs in the Seattle Area (https://www.homemadeturbo.com/general-discussion-6/where-get-some-12v-leds-seattle-area-76566/)

70Challenger 04-15-2007 11:28 AM

Where to get some 12v LEDs in the Seattle Area
 
Wondering if there was a good electronics store in the greater seattle area where i could pick up some bright 12 volt LEDs. I went to RadioShack and to Frys Electronics but they didnt really have much of a selection, all they had for 12 volt was red and yellow, and i am trying to replace my burned out climate control backlighting in my 240, since the original bulbs are nissan parts, not standard 194 wedge bulbs like normal cars. I bought a red led but it wasnt bright enough for backlighting. I could just replace it with a standard minibulb but where is the fun in that, and i dont really want to order them offline because i dont want to have my dash apart for a week or more waiting for it to come in the mail, or put it all back together just to tear the unit apart again. Soooooo......

Any good electronic stores i should try that might carry a desent sized selection of 12v LEDs in the Greater Seattle Area???

I am looking for LEDs with the metal leads like this:

http://www.dansdata.com/images/caselight/led322.jpg

To replace a nissan bulb like this:

https://i127.photobucket.com/albums/...ar_s007/14.jpg

-SKUM- 04-15-2007 11:45 AM

Re: Where to get some 12v LEDs in the Seattle Area
 
Maybe check frys electronics. ;)

70Challenger 04-15-2007 11:49 AM

Re: Where to get some 12v LEDs in the Seattle Area
 

Originally Posted by ratcityrex
Maybe check frys electronics. ;)

umm did you read my post? i went there ;D

-SKUM- 04-15-2007 02:54 PM

Re: Where to get some 12v LEDs in the Seattle Area
 
I was still sleeping when I posted it, My bad. Try cartoys, They have a ass ton of them for all the bling blang installs they do.

Smith-02 04-15-2007 03:29 PM

Re: Where to get some 12v LEDs in the Seattle Area
 
standard LEDs use a 330-370ohm resistor to step the voltage down to correct levels

HMTguy 04-15-2007 03:49 PM

Re: Where to get some 12v LEDs in the Seattle Area
 
Bingo, just get any old LED and a resistor. That's how I got my vtak light wired up

70Challenger 04-15-2007 11:12 PM

Re: Where to get some 12v LEDs in the Seattle Area
 
thanks thats what i ended up doing was calculating the resistor i needed and just hardwired it inline, worked great, i'll try to upload some pics


All times are GMT -5. The time now is 10:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands