where to get a piece like stealthy's return fitting?
where to get a fitting like this
http://---------------------------/oillinepreview.jpg but not for the return side... for the feed? my oil feed doesn't have threads to screw the fitting into so i need a piece like the return side then i can thread the fitting for my oil feed... thanks |
Re: where to get a piece like stealthy's return fitting?
try stealthmode performance.....i heard they carry them
|
Re: where to get a piece like stealthy's return fitting?
i need this
http://---------------------------/T3drainflange.jpg but for the feed... ive seen it before i jus dont kno where to get it. stealthy only has the return pieces. |
Re: where to get a piece like stealthy's return fitting?
|
Re: where to get a piece like stealthy's return fitting?
or you could just tap the hole with a 1/8 npt tap
|
Re: where to get a piece like stealthy's return fitting?
Thats what I did.
|
Re: where to get a piece like stealthy's return fitting?
Originally Posted by julio_bOOstamante
or you could just tap the hole with a 1/8 npt tap
|
Re: where to get a piece like stealthy's return fitting?
i think i have the inlet with a -4AN thread on it.
i think i paid like $25 shipped for it. if your interested, i would go 20 shipped OBO. that is if i can find it, which im pretty sure i know where its at. (i bought it thinking i would need it, but the turbo was allready threaded and i just used a brass fitting for it) LMK |
Re: where to get a piece like stealthy's return fitting?
Originally Posted by julio_bOOstamante
or you could just tap the hole with a 1/8 npt tap
|
Re: where to get a piece like stealthy's return fitting?
http://www.adrianteo.com/ebay/f7t34c...umbnails/2.jpg
something like this? as steve already said... craig has them. I've used a few of them |
Re: where to get a piece like stealthy's return fitting?
thats the same one i have
|
Re: where to get a piece like stealthy's return fitting?
check my sig ;)
|
Re: where to get a piece like stealthy's return fitting?
Originally Posted by Whitey
check my sig ;)
|
Re: where to get a piece like stealthy's return fitting?
Originally Posted by 91dxcrx
Originally Posted by Whitey
check my sig ;)
Oh I'm running a VD special this month. I'll have to check with my supplier with pricing ;) |
Re: where to get a piece like stealthy's return fitting?
Originally Posted by Whitey
Originally Posted by 91dxcrx
Originally Posted by Whitey
check my sig ;)
Oh I'm running a VD special this month. I'll have to check with my supplier with pricing ;) |
Re: where to get a piece like stealthy's return fitting?
1 Attachment(s)
I didn't want to tap mine because I didn't want to chance dropping shavings into the oil passage...
So, I bought a flange from STS turbo (they were local to me at the time) they only charged me $5 :) Attachment 38323 |
Re: where to get a piece like stealthy's return fitting?
If you DO tap it, do it while the turbo is upside down so you don't get shavings in the turbo. And vacuum it or whatever you have to do.
|
Re: where to get a piece like stealthy's return fitting?
if you do tap it, use grease on the tap and then clean it out with brake clean as well. Then blow it out real good with a air nozzle.
|
Re: where to get a piece like stealthy's return fitting?
Originally Posted by ej1 wilcox
I didn't want to tap mine because I didn't want to chance dropping shavings into the oil passage...
So, I bought a flange from STS turbo (they were local to me at the time) they only charged me $5 :) https://img.photobucket.com/albums/v...013resized.jpg |
Re: where to get a piece like stealthy's return fitting?
yeah, i tapped mine upside down with grease on the tap and backed it out every few turns and cleaned the tap off and put fresh grease on it. i didn't see any metal shavings in there at all.
|
Re: where to get a piece like stealthy's return fitting?
for everyone else who -----'d it with them vd kits :: middle finger :: but thanks abaz im going to be ordering one of those from tunertoyz. his already has the thread ---- on it for my oil feed line to screw into. saves me a buncha time and he deserves customerz for great products.
|
All times are GMT -5. The time now is 03:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands