whats this engine
ford
fwd 4 cyl 12 valve turbo intercooled from the factory no pics sorry anyone know what its in and what size etc |
Re: whats this engine
Probe motor ???
|
Re: whats this engine
coulkd be
|
Re: whats this engine
Originally Posted by solfly
coulkd be
Did I win? |
Re: whats this engine
i dont know what it is
ill try to remember to put the pic up tomorrow |
Re: whats this engine
i found this engine aswell
engine valve cover oil pan goes vroom vroom |
Re: whats this engine
probe or mx-6 motor proly
|
Re: whats this engine
Only ones I can think of are the older Ford Probes and Mazda 626's. Their 12 valve 2.2's \
http://img156.imageshack.us/img156/3...694full9yq.jpg |
Re: whats this engine
|
Re: whats this engine
|
Re: whats this engine
yeah its the 2.2L engine, has an IHI RBJ5 turbo (small as hell)
|
Re: whats this engine
That's not a Ford engine ::)
Ford Escort EXP, nogs! |
Re: whats this engine
haha EXP. ------- hot. 1.6's right?
|
Re: whats this engine
Originally Posted by Joseph Davis
That's not a Ford engine ::)
Ford Escort EXP, nogs! I dont remember Exp's having an intercooler. |
Re: whats this engine
What about the Mustang and Thunderbird 4cyl Turbo engine. 2.3L with a decent sized turbo.
Intercooled or not? I don't know... |
Re: whats this engine
if its the motor im thinking of, it came from a 1989-1992 Ford GT probe, its a 12 valve sohc 2.2L turbo
my buddy is finding one to swap into his mazda so i did some research on them for him a couple weeks back |
Re: whats this engine
Probe is a mazda engine. 2.3 is not 3 valves per cyl. That leaves the exp which is not the same as anything else mentioned, but it does have same bolt pattern as 1.9 and 2.3
|
Re: whats this engine
Originally Posted by Joseph Davis
Probe is a mazda engine. 2.3 is not 3 valves per cyl. That leaves the exp which is not the same as anything else mentioned, but it does have same bolt pattern as 1.9 and 2.3
the motor im thinkin of has specs here http://probefaq.org/specs.html |
Re: whats this engine
Originally Posted by Sevenlover
Only ones I can think of are the older Ford Probes and Mazda 626's. Their 12 valve 2.2's \
http://img156.imageshack.us/img156/3...694full9yq.jpg |
Re: whats this engine
Originally Posted by solfly
thats the one
|
Re: whats this engine
Originally Posted by jecu
yeah that motor sucks.......if your looking to use the turbo off of it, dont waste your time. Its to small and very inefficient (sp).
it has 7.8:1 stock, swap a new turbo, get a good intercooler and fuel system and that should be good for at least a few months of fun with some decent boost untill it blows and gets his new motor built |
Re: whats this engine
93+ Escort and 323 are essentially the same chassis. Some of the mounts may be off, BUT I know the upper radiator support in the early 90's is the exact same piece - had a neighbor used to fix salvage vehicles for resale.
If you can fit the 1.9 HO transmission you can run a 2.3T, but it's heavy and you have to cut + box the frame rail due to length. No comment on transmission life. |
Re: whats this engine
Originally Posted by leed
haha EXP. ------- hot. 1.6's right?
|
Re: whats this engine
Originally Posted by Anubis_4_99
im not, my buddy wants somethin to go semi fast for cheap for now, and for him that's a good starter motor
it has 7.8:1 stock, swap a new turbo, get a good intercooler and fuel system and that should be good for at least a few months of fun with some decent boost untill it blows and gets his new motor built PS- Tell him to read up on Probetalk.com or MX6.com those sites have plenty of info |
Re: whats this engine
Originally Posted by jecu
theres guys out there with T3/T4's hanging off of them and running 15+ psi, only to pray to break 200whp (no joke). The best they can pull is low 14's with suspension, bigger fmic, fuel mods.......those motors are a complete waste. They barely have an aftermarket so everything has to be custom=expensive.The only engine management that half ass works on them is megasquirt. If your buddy wants a good platform, I suggest he look into the FE3 ;)
PS- Tell him to read up on Probetalk.com or MX6.com those sites have plenty of info |
Re: whats this engine
Originally Posted by Anubis_4_99
like i said he wants something cheap while he builds his next motor, it'll be fine for a motor to beat on untill then
|
Re: whats this engine
Originally Posted by jecu
theres guys out there with T3/T4's hanging off of them and running 15+ psi, only to pray to break 200whp (no joke). The best they can pull is low 14's with suspension, bigger fmic, fuel mods.......those motors are a complete waste. They barely have an aftermarket so everything has to be custom=expensive.The only engine management that half ass works on them is megasquirt. If your buddy wants a good platform, I suggest he look into the FE3 ;)
PS- Tell him to read up on Probetalk.com or MX6.com those sites have plenty of info There was another guy with one, minor mods, fuel a big t3/t4, I don't know all the specs, but he ran low 13's all day. So they aren't the best but if you know what you are doing, you can get decent power out of them, and I mean decent for a daily driver that can at least spank 80% of the civics on the road, and goes vroooooom,,psssssst,, :-\ |
Re: whats this engine
Originally Posted by davcivic
My bro-in-law had one, stock turbo/intercooler/well pretty much anything, Homemade boost controller and open pipe, he ran 14.3 @15psi.
There was another guy with one, minor mods, fuel a big t3/t4, I don't know all the specs, but he ran low 13's all day. So they aren't the best but if you know what you are doing, you can get decent power out of them, and I mean decent for a daily driver that can at least spank 80% of the civics on the road, and goes vroooooom,,psssssst,, :-\ |
Re: whats this engine
I don't know, All engines are different, even with the same specs. But I was pretty impressed with this guy after he ran that low 13 pass. I was at the track kinda knew the guy from before.
I loved it because the car looked like ----, but was pretty quick. for an MX-6 |
Re: whats this engine
My cousin had one and owned the engine by winding out the turbo...
|
Re: whats this engine
could be a Mitsubishi Starion/Chrysler Conquest i think they are 2.4's
|
Re: whats this engine
Originally Posted by ComptonsF1NEST
could be a Mitsubishi Starion/Chrysler Conquest i think they are 2.4's
|
Re: whats this engine
o, i didnt see the "Ford" label
---- domestic 4 cylinders |
Re: whats this engine
1.6 dohc , the escort turbo motor... im pretty sure that is a mazda b6T ... as for the probe and 626 engine, they are the mazda f2 engine...2.2t... so if it says ford... chances are its one of those.... but who knows
|
Re: whats this engine
Originally Posted by Qdawg
acally the turbo EXP's had 1.9's in them
Early EXP=1.6 Turbo Later EXP=1.9 N/A |
Re: whats this engine
Originally Posted by jeffescortlx
Um no they did'nt
Early EXP=1.6 Turbo Later EXP=1.9 N/A |
Re: whats this engine
we already figured out it was the F2T out of the old ford probe GT's and MX6 GT's
|
Re: whats this engine
Originally Posted by ComptonsF1NEST
---- domestic 4 cylinders
|
All times are GMT -5. The time now is 04:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands