Went to the track :) and :(
My night was a mess, first three passes I spent trying to track down a noise that sounded like either the trans or rearend, ended up being a loose clamp on a charge pipe that was leaking massive mount of air. Next two passes where spent trying to figure out where the boost was set at again...with the before mentioned huge leak I had cranked down the boost controller in an effort to get it to boost higher. Going to check the datalogs later to see what my air temps where, but I bet they where nuts.
Got one decent pass in again at 25# against a nice and loud small block car. http://www.eville140.com/video/smackdown.wmv Next pass I somehow botched going into second and hit the rev limiter pretty hard. Had some pretty nasty sounds after that. Got it home and popped the valve cover to find one rocker backed off far enough that the pushrod was just flopping and two other with the jamb nuts backed off a couple turns. All on the exhaust side. Only got a couple more tries to get it into the 6's in the 1/8th |
Re: Went to the track :) and :(
baller
|
Re: Went to the track :) and :(
Originally Posted by Eville140
Only got a couple more tries to get it into the 6's in the 1/8th My brother is in the process of building a 2RZ 81' model. It should make his 400hp MR2 look like a yugo. |
Re: Went to the track :) and :(
Nice run,what was you 60' ? I test fitted some 26-8.5-15 slicks on the corolla and they fit. I am planning on going to epping on oct 4th for the import shoot out and see what i can run. I am putting a 4 bar map in the MS this weekend so i can up the boost,I maxed out the 2 bar the other week end. Are you running a 2 step?
Mark |
Re: Went to the track :) and :(
Originally Posted by win0857
Nice run,what was you 60' ? I test fitted some 26-8.5-15 slicks on the corolla and they fit. I am planning on going to epping on oct 4th for the import shoot out and see what i can run. I am putting a 4 bar map in the MS this weekend so i can up the boost,I maxed out the 2 bar the other week end. Are you running a 2 step?
Mark I put the mapdaddy sensor in my MS also, works great and price is great to boot. I'm running MS2-extra and using it's 2-step. Was launching at 5600rpm with about 10# of boost, any more and it would loose traction about 20 feet out. Going to try and go back out in a couple weeks. |
Re: Went to the track :) and :(
you just beat down a turbo regal. funny LoL
|
Re: Went to the track :) and :(
That's pretty fast. Sounds pretty nasty too. Looks scary to drive to be honest. Good luck gettin' it sorted out.
|
Re: Went to the track :) and :(
|
Re: Went to the track :) and :(
I haven't hitched up the 2 step yet. I was looking at the datalog's from the other week end and my RPM's were jumping around after 5,000 RPM. I don't know if it is a problem in the distributor or computer, this may have been why the car was loosing power after that RPM. I think i can get my 60' times down a tenth or 2 with the slicks. Great run, good luck on getting to the 6's.
Mark |
Re: Went to the track :) and :(
Man that guy is fast!
|
Re: Went to the track :) and :(
damn i miss my starlet..
even tho it was that fast!!! |
Re: Went to the track :) and :(
I love your car. Your bumper signal is hooked up to your brakes.
|
Re: Went to the track :) and :(
Originally Posted by brine04
I love your car. Your bumper signal is hooked up to your brakes.
|
Re: Went to the track :) and :(
Originally Posted by brine04
I love your car. Your bumper signal is hooked up to your brakes.
One I have a light burnt out in the front passenger side. then the parking lights won't work using the headlight knob on the dash. But the brake lights work...even in the front. When I push the brake pedal down my dash lights also light up. lol If I hold the brake down and turn the ignition key off the car will stay running til I let up on the brake pedal. :8 Old ass car with some issues. |
Re: Went to the track :) and :(
Sounds like a Honda that's been owned by anyone younger than 25.
I love when they cut the harness going to the rear of the chassis in order to wire in a sweet JDM B16. |
Re: Went to the track :) and :(
The car is pretty tits. Not something you see everyday especially in person. Hella nice job on Jeremy's manifold on saturday by the way. Car was alot better noise wise too till we hit a killer pot hole and snapped the v-band clamp.
|
All times are GMT -5. The time now is 12:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands