Well i got this today!!!!!!!!!!!!!!!11
 

well my personalized plates came in....refer to sig...let me know what your think.

im not an SR fan really..all the local's are like " you should put in a sr swap man"...ugh...that jdm tyte ---- is getting old.....i drive a 240sx. Built KA24DE engine. and when i meen built...i meen built. with a .69 AR T4 turbo.

lewis ;D

Re: Well i got this today!!!!!!!!!!!!!!!11
 

haha sick! How about pics of the ride y0!

Re: Well i got this today!!!!!!!!!!!!!!!11
 

i need that in a sticker. I'd be all over it. What numbers are you putting down? I'm doing the same thing right now, I'm just way further behind in the process

Re: Well i got this today!!!!!!!!!!!!!!!11
 

dont know...havent dyno'd yet....all on a street tune....ive been so busy its not even funny....im not driving it right now cause i have a leak between my intake mani and my head....shitty ass gaskets...im gonna have to get something that can handle this ----...im running 14psi right now...boost starts around 3400 and full boost at 4100 all the way to 7000...and shift...spin tires....7000 rpms again...shift spin some more tires....ill post some pics up here sometime when i finally fix the leak...i think the intake mani is actually cracked...hairline that is....cause its so minor but it worries me...makes the car idle funky.

lewis

Re: Well i got this today!!!!!!!!!!!!!!!11
 

any of u guys have or know anyone that has ka turbo injectors? the goofy looking ones

Re: Well i got this today!!!!!!!!!!!!!!!11
 

sidefeeds? KA turbo? knaw your prolly thinking of SR injectors...stock KA injectors are 260cc sidefeed...S13/14 SR injectors are 370cc and s15 sr are 480cc

me...i bought a jgycustoms fuel rail and went top feed injectors.

lewis

Re: Well i got this today!!!!!!!!!!!!!!!11
 

Ha nice plate. I hate it when people ask if I have V-Tec. I have a DOHC ZC and was gonna get custom plates that say "NOVTEC" but thats not gonna happen till I get boost... damn not having money sucks (all I need is IC piping and a rom burner).

Re: Well i got this today!!!!!!!!!!!!!!!11
 

i just realized it saays J0 on the top left, what does that mean j0!?

Re: Well i got this today!!!!!!!!!!!!!!!11
 

Nice plates. I've been thinking about what plate I want for the stealth shuttle and I think it's just gonna say OWNED. lol

Re: Well i got this today!!!!!!!!!!!!!!!11
 

where can you get some 480's from? do they work in 300zxs? how much do they sell for?

Re: Well i got this today!!!!!!!!!!!!!!!11
 

JO is the initials for the county i live in...well atleast the one im registered to....SR480's?...man its hard to find those....SR370's are easy to find...can get a set of 4 for 50 bux...the older 300zx's can use the sr injectors and the 95 and up 300's can use them also....90-94 have a different style sidefeed than the others....if you bought 2 sets u could use them since your 6 cylinder...and you will have 2 extras....do a google search for JGY customs and you shouild find them in there fuel section. your stock 260's in the older 300's are only good for 280hp....but the 370's would be good for 380hp and then use an safc to control the injectors...not to shabby i do say so myself.

lewis

Re: Well i got this today!!!!!!!!!!!!!!!11
 

so are injectors basically the same once they're top feed? Like coud I get some stealthmode 550's and a top feed fuel rail and use that?

Re: Well i got this today!!!!!!!!!!!!!!!11
 

nice plate. What did that run ya?

Re: Well i got this today!!!!!!!!!!!!!!!11
 

Haha good ----. I know in Connecticut, its like 90 bucks or something. Way to be original with the KA though. People take the easy way out with the sr20 swap, but most don't even realize the potential your motor has.

Re: Well i got this today!!!!!!!!!!!!!!!11
 

I was gonna get that or "KA BOOM" -or- USDMTYT

Re: Well i got this today!!!!!!!!!!!!!!!11
 

i was gonna get something like that. but i dont know what the hell to use since most of the rotary clowns took them all.

Re: Well i got this today!!!!!!!!!!!!!!!11
 

you should get "FnF RX7" :D

Re: Well i got this today!!!!!!!!!!!!!!!11
 

http://www.jgycustoms.com/240sx/fuel.htm

heres a link for ya bud....it will cost you less than 150 bux for the rail...and then get you a set of dsm 450's and have fun....with an safc you can control them and also go up to 520cc injectors. Anymore and you will need the greddy emanage ultimate or something else. If you do a search on the greddy emanage ultimate. Its the new system they have out and its alot better than the first emanage. Controls ALOT bigger injectors and it also controls timing and a world of other features. Cost you around 600 for the setup total. Its awesome. I know a local who uses it and i would get it over an AEM EMS anyday. Cost wise and the fact im not looking for 700hp. I just want 400 to 450 and ill be happy.

lewis

ps. the plate ran me 44 dollars over regular registration. I paid total 131 bux for the plate and 14 month registration because i was almost due for a new tag...so im good til june next year now.

lewis

Re: Well i got this today!!!!!!!!!!!!!!!11
 

oh and using stealthmode 550's with safc would run you pretty damn rich at idle...you would have to bump your idle to like 1200 to 1500 rpms to compensate for the extra fuel flow....now if your running some other kind of management like i mentioned with the greddy unit then your golden. remember, with an safc only 520cc...u could prolly get away on 525 but no larger.

lewis