wastegate problem
 

i'm new to this turbo seen finally got turbo mounted on 1.5 crx beginning to work on charge pipes question is i took turbo off a 87 lebaron i don,t know what kind of turbo it is it has a adjustable wastegate arm on it which is good but the vacuum line on it i don't know where goes because there ain't no place on the actual turbo can u tap into some vacuum line on engine any information would be gladly appreciated

Re:wastegate problem
 

The wastegate vacuum/signal line just needs to be tee'd into any vacuum sorce on the TB.
Whats the rest of your planned set up?

Re:wastegate problem
 

doesnt even need to be on the tb, can be anywhere on charge pipes

Re:wastegate problem
 

TB-> Throttle body. guys realize that not all of us know these short terms like TB. anyway yeah just Get a small brass or plastic T and use one of the vaccum lines on your TB, there are 2 different lines you can use that come off your TB i think, i'm not sure how many there are on a D15 engine but in a D16 there are 2 that i am using. and remember dont over boost that little engine, i say about 3-4 psi would be good

Re:wastegate problem
 

thanx for info but going back to stock for time being because turbo seals were all shot need a rebuild kit.

Re:wastegate problem
 

True..true. Mine is plumbed to the compressor oulet right now.