Video from Mission Raceway BC 4-02-04
 

Just a quick compilation I threw together, w/ the standard Bonus footage :-*

Its got Terry 'SpecialFX' racing his stock SHO, Jay with his boosted ZC Crx hf, and Matt's boosted LS Teg. Both the CRX and the Integra are running TE2.0 :)

Enjoy.

Right-click-save-as:
http://www.draglab.com/Mission_4-2-04 LQ.wmv

Okay Im an idiot, cant get the link right. Ill let Jeffery fix it. :-*

Re:Video from Mission Raceway BC 4-02-04
 

---- ----, link don't work. :'(
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Video from Mission Raceway BC 4-02-04
 

Fixed yo

Re:Video from Mission Raceway BC 4-02-04
 

Haha, That was a good video. That nasty bog is something else ;)

Re:Video from Mission Raceway BC 4-02-04
 

OMG what all is done to the ZC rex? :o That fucker rips it up. How much boost is he running? If it weren't for that bog....damn. Nice video. :)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Video from Mission Raceway BC 4-02-04
 

Re:Video from Mission Raceway BC 4-02-04
 

I don't think anyone can ever top your video's. They're fucken great!!!
A great showing for turboedit for sure. I'm glad that's what I'll be going with. ;)

Re:Video from Mission Raceway BC 4-02-04
 

sweet

Beau

Re:Video from Mission Raceway BC 4-02-04
 

CRX hf ZC w/ 18g at 12-13psi.

The best thing about the car is the total cost.

Car $900
ZC already had it.
18g, like $75 from a wrecking yard..lucky bastard.
Using a cut dx mani w/ CC adapter plate welded.
Exhaust: Dodge diesel 3.5" Free-dumpster diving.
Charge pipes: Free Dumpster diving.
Intercooler: had it laying around, but paid to have end tanks reworked.
Engine managment: 450's + TE2.0

All in all w/ all the misc bullshit, Jay built this for a total of around $1600. Not ------- bad.

Re:Video from Mission Raceway BC 4-02-04
 

whats the info on the LS?....im liking those times...means i might do better than i was hoping ;)

Re:Video from Mission Raceway BC 4-02-04
 

What's Jay's screen name? I may want to contact him about my fuel management. He's doing pretty much the same thing I'm setting up. ;)

Re:Video from Mission Raceway BC 4-02-04
 

Hes not on HMT, hes actually pretty hardcore All motor. His TE was done by me. Timing was his call though.

As far as the turbo LS, his turbo (random GM truck turbo) is pretty freakin huge. A bit late on the spool, but not too bad. 4.5k-5k depending on gear/load. Hes trapping at 105's on 7-9psi with 19* of timing on the top end and high 11's A/F. His block is from his old LS vtec I believe, w/ p30 or PR3 pistons (cant remember), so his CR is a bit high 10.8ish. It pulls good for 2600ish lbs.

Re:Video from Mission Raceway BC 4-02-04
 

well then. ;D

I'll keep you in mind. If anything I was just wondering about running 12-13 psi and the last fuel colum. (I get back to you if I need help.) Thanks

Re:Video from Mission Raceway BC 4-02-04
 

nice vid

Re:Video from Mission Raceway BC 4-02-04
 

Hey, dave, I know your kinda local to me (federal way) I need to get my b16a ecu chipped and i have exactly 50 dollars (including gas!!) how much can you chip it for?

I already have the low pro zif socket and a bunch of 29c256's (i can give you a couple if you want)

Give me a call man.
2533476558
Josh

Re:Video from Mission Raceway BC 4-02-04
 

nice

Re:Video from Mission Raceway BC 4-02-04
 

Jays car ------- rips but its a bitch to drive, I was really having trouble banging gears between the truck shifter and the boost controler on the shifter i couldnt do anything right.
Jay is nice enough to let me race it tomorrow at mission but im not expecting much my driving skills are lacking.
Dave thanks for letting me use the slick's ill warm them up nicely ;D
steve

Re:Video from Mission Raceway BC 4-02-04
 

leed that vid was awsome, i loved it. whats that hf dyno at anyway? and whats the setup on the b16 rex?

Re:Video from Mission Raceway BC 4-02-04
 

The HF recently dynoed at a staggering 204whp. Was having problems on the dyno getting the boost to hold, so It was tapering to 9-10psi on the top end. If it would have held 12 all the way, it would have made an honest 220-225whp. The 18g makes the setup. Car pulls very hard to 7400 w/ 0-wheeze on the top end.

My CRX is a 91Si, B16 9.7:1 (us itr pistons), T3 60/63, ITR cams/IM, Uberdata. My boost spiker...errr controler is being very difficult, so I was down to 10psi on the video. At 10psi I would dyno around 250whp. Ive hit 237 on 8, 263 on 11, & 277 on 14. My overworked T3 is not a good match with the ITR cams. I made peak torque on the low speed lobes lol. blah..blah...excuses :P

The HF is a well breathing solid setup in a lightweight car = ------- fast :)

Re:Video from Mission Raceway BC 4-02-04
 

good vid :D bwahaha, on the last run, when they're lined up just sitting there, you can here crickets and frogs chirping.......

Re:Video from Mission Raceway BC 4-02-04
 

Dave, you -------. You could have at least edited the video to play faster so my car didn't look so slow. Hell, I'd even hook you up with a new passenger-side brake light! Either way, I have never seen a tach move so fast in my life as that ZC. My rods get here in three days, gentlemen. Then, all hell breaks loose. A little machine work and a shitload of attention to detail. Attn. Jay Lawlor: "The horseman comes, and tonight he comes for you!"

Re:Video from Mission Raceway BC 4-02-04
 

That was the best damnn video ever..... ;D
Yo bot is representing the ZC.
I want another CRX :)

Re:Video from Mission Raceway BC 4-02-04
 

Sweet video that's for sure!

Stan

Re:Video from Mission Raceway BC 4-02-04
 

I raced Jay's turbo ZC last night on the freeway.. ;)

Re:Video from Mission Raceway BC 4-02-04
 

ok i got a question with that ZC: is it me or does it sound like either he had a slipping clutch or is that him loosing hella traction?

BTW that video is badass, as you guys saw ZC (d-series) walked his B!!!!! :P

Re:Video from Mission Raceway BC 4-02-04
 

From the smiley face Jeff....I can tell you won???

Re:Video from Mission Raceway BC 4-02-04
 

ok leed got a question:
does that hf have slicks or not :-\ because it launches awsome and hes warmin up those tires for a little bit. but it dosent look like hes got slicks on

Re:Video from Mission Raceway BC 4-02-04
 

I am kind of in the middle of boosting my zc and I am going to use a evo VIII 16g. I was wondering if you wouldn't mind sharing the maps used for Jay's car :-\.

Re:Video from Mission Raceway BC 4-02-04
 

SICK VIDEO LOVE THE ZC WALKING DOWN THE B16 WAS IT
ABAZ WHOD U DO ON THE FREEWAY RACE WHO WON

Re:Video from Mission Raceway BC 4-02-04
 

nice vid.. its about time there are more vids.. i am tired of looking at pics..

what do you guys use to edit the videos? (i figure everyone asks about the cars, i will ask about the vid :) )

Re:Video from Mission Raceway BC 4-02-04
 

ZC muthafucka's, Props on the video.

Re:Video from Mission Raceway BC 4-02-04
 

I dont mind at all. The only problem is that this was on NG3? I think, and it has a serious flaw in the code that ultimately resulted in a huge fuel dump during transition. <<This has been fixed in the newer version>>

Unfortunately, his car was never retuned on the new .bin, and never will be. Atleast, not with the 18g on there, the car is being sold with a 14b.
I could copy/paste the maps, and it will be close, but not the same. I noticed this when redoing another friends car with the new .bin, it required a retune w/ the WB. I can however, get you pretty close. PM me w/ your set-up and expected max boost level if you want it.

I have been using Magix and VegasVideo to edit my vids. Pretty easy to pick up, but not overly basic. I really like VegasVideo, but use Magix the most. It is VERY stable for me.