v-afc on a non-vtec engine
Can you use a v-afc on a ls motor? Or is just better to get a s-afc? If so do you just turn off the vtec option? thanks alot sorry for the dumb question ;D
|
Re: v-afc on a non-vtec engine
end yourself
|
Re: v-afc on a non-vtec engine
SORRY<Its not for me im running turboedit. Its for a friend but i dont know the answer cause i never tried it.
|
Re: v-afc on a non-vtec engine
i never ran one, but to my understanding, vafc is for vtec control and curves, where as an safc is for your fuel and air control. Tell your buddy to read of it first, but Im almost 100% sure that v afc is for vtec engines only
|
Re: v-afc on a non-vtec engine
im using the vafc on my non-vtec engine...no problems
|
Re: v-afc on a non-vtec engine
cool. what did you do with the vtec option?
|
Re: v-afc on a non-vtec engine
you dont connect it lol
|
Re: v-afc on a non-vtec engine
i thought the v afc just gave you like a wider map to tune with
|
Re: v-afc on a non-vtec engine
isnt the vafc a littlemore expensive then an safc II
|
Re: v-afc on a non-vtec engine
Paul quit while your ahead :P
vafc is the same as the safc except it has vtec if u dont have vtec dont hookup the wire for it same difference |
Re: v-afc on a non-vtec engine
thanks alot ravage.
|
Re: v-afc on a non-vtec engine
I ran a vafcon a non vtec motor and it was never a problem.
|
Re: v-afc on a non-vtec engine
- using vafc on my LS... no problems here... vtec not hooked up...
|
Re: v-afc on a non-vtec engine
thanks alot guy, you have been good help
|
Re: v-afc on a non-vtec engine
i know they come with a harness but pretty sure it cant hook up to a honda, so do you have to cut the harness off and wire it to the wires comming out of the ECU? thanks any help would be good
|
Re: v-afc on a non-vtec engine
dude jus go to the apexi.com website... use the safc installation diagram n use it like an safc, same ---- but it controls vtec if u want it to. it tells u how to install. some u cut n some u jus tap. dot dot dot
|
All times are GMT -5. The time now is 07:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands