turbo's done took some pics,
 

well, almost done, need to get a vacuum manifold and redo my lines, other than that and getting a new downpipe, shes done.

http://customcivics.com/~brandon/ima.../DSC01135b.jpg
http://customcivics.com/~brandon/ima.../DSC01137b.jpg
http://customcivics.com/~brandon/ima...l/DSC01140.jpg
http://customcivics.com/~brandon/ima...l/DSC01139.jpg http://customcivics.com/~brandon/ima...l/DSC01138.jpg
http://customcivics.com/~brandon/ima...l/DSC01120.jpg
http://customcivics.com/~brandon/ima...l/DSC01117.jpg

Re:turbo's done took some pics,
 

looks like it'll be pretty fast.

Re:turbo's done took some pics,
 

looks great!
what kind of fuel pump is that?
specs on rest of car...

Re:turbo's done took some pics,
 

i would have to say.. that doesnt look half bad.. in fact.. i kinda like it :)

but.. do you have a dump tube for you wastegate? you wouldnt want that spraying the radiator.. :o

all and all looks good..

i wouldnt mind seeing a pic closer of the exhaust. i like the straight muffler.. and the sideways style, i am just wondering how it looks from straight behind the car.

::thumbs up::

Re:turbo's done took some pics,
 

I spy an FMU! :-X

It looks good though. Nice and clean. We need more details. :)

BTW, you might want to check your rear brakes. ;)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:turbo's done took some pics,
 

i like how the half radiator is sitting in there, but i like boost's lean back style better

Re:turbo's done took some pics,
 

kit is a revhard crx hybrid kit
the fuel pump is a walbro 255 until i can get a intank pump,
i dont have a dumptube but im having one made tomorow along with a new downpipe,

its a 91 si
jdm b16a swap/ placemounts and j1 tranny
exedy organic clutch
revhard kit
aem cam gears set at 0
Itr cams
ur underdrive crank pulley
stainless oil and return lines,
autometer egt and boost gauge
rota subzeros 16"
shitty tires
Kyb agx shocks
H&R springs
Full Race Traction Bar
Camber kit (cant remmber who made it)
hawk hps plus pads
goodridge stainless brake lines
brembo blank rotors
magnecore wires
ngk plugs


there might be more that im leaving out, the exhaust isnt slanted, it comes straight out,
http://texas.clubsi.com/brandon/pict...rx/ennis/1.gif

Re:turbo's done took some pics,
 

why?

Re:turbo's done took some pics,
 

It looks like you have to pull that E-brake to Jerusalem to get it to work. :o

http://customcivics.com/~brandon/ima...l/DSC01138.jpg
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:turbo's done took some pics,
 

ohh , i always just pull it up that high

Re:turbo's done took some pics,
 

Battery in the rear?

Looks pretty good

Re:turbo's done took some pics,
 

All that money and you have an fmu? If you plan on keeping the fmu atleast upgrade to 270 or 310 injectors.

Re:turbo's done took some pics,
 

Really? Mine won't let me come close to that far up. 3 clicks and I'm done. I guess you have rear disk though, so that's probably why.....
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:turbo's done took some pics,
 

that ---- looks hot
good work
how does it pull?
how many lbs of boost?
my boy had a crx with a d16z6 running 8 lbs with fmu and that bitch halled ass so yours should pull hard
thumbs up

Re:turbo's done took some pics,
 

dam, that ---- looks good.

send your ecu to projekteg to have some uber put on that ----.

Re:turbo's done took some pics,
 

it spools at 4100 ish , im only running 5 psi it pulls like a bastard up until about 6k :( last night i put in new plugs and set my cams back to zero and it would pull all the way up to 8, this afternoon it started sucking again and now it only pulls up until 6 , my plugs are probably fouled, im going to keep it out of boost till i can get that vacuum manifold and redo everything thats needs vacuum.

Re:turbo's done took some pics,
 

get projektegs base map and you will double that boost.
if you think it pulls now...just wait till you can crank it up. ;D

Re:turbo's done took some pics,
 

nice setup...i wonder if i'll see this car on h-t. hahaha...your so JdM MAN!!

Re:turbo's done took some pics,
 

No.It shouldnt come up that high.The more your brakes wear the higher it goes till you adjust them.Justin is right...might want to take a look at them.Or maybe your cable is loose :-\.

Nice car though.

Re:turbo's done took some pics,
 

is it me or your hood lifts up pretty high

Re:turbo's done took some pics,
 

Is that charge piping part of the RevHard kit? That is sweet! We were considering adding an upper pre-bent pipe to our piping kit. Thanks from Craig

(Shameless Plug - Vacuum Manifolds are in our online store for $31.10 plus shipping - http://stores.ebay.com/Tuner-Toys)

;D

Re:turbo's done took some pics,
 

who cares maybe he's using a longer hood propper upper :P

anyways that one clean lookin rex

Re:turbo's done took some pics,
 

damn man the car looks super clean. i basicly have the same car, but without the turbo kit :(. nice job

got any numbers on her? 1/4 mile or dyno

Re:turbo's done took some pics,
 

wow, some of those are now my backround pics. nice !

Re:turbo's done took some pics,
 

sold, i paypaled you this morning, if you could get it shipped out asap that would help i need this part yesterday lol.

Re:turbo's done took some pics,
 

i want one.

Re:turbo's done took some pics,
 

I wonder how I missed this post :-\

Looks good man, real nice! ;D

Re:turbo's done took some pics,
 

thanks for my props, wonder if my vacuum manifold shipped out today, i never got a confirmation.

Re:turbo's done took some pics,
 

Are those 16" Rota subzero's? How much is your car lowered?

Re:turbo's done took some pics,
 

yes, i have integra springs so im guessing about inch and a half

Re:turbo's done took some pics,
 

here some crappy video, there was too much traffic out to really play, maybe next week

tollway1
tollway2

Re:turbo's done took some pics,
 

It looks good. ;D

Re:turbo's done took some pics,
 

Can u read..

NO PARKING ;D

Nice motor

Re:turbo's done took some pics,
 

Considering he is OBD0 he might have a hard time using uberdata and kevins base map. ::)

Also, you cannot chip TE with a PR3 ecu.

Re:turbo's done took some pics,
 

Correction, you cannot BOOST with a chipped pr3 but you can use TE

Re:turbo's done took some pics,
 

Josh, dont be a ------- wanker, why make a big scene deleting your account and now create another account and start again?

Obviously HMT ownz your ass :P

Re:turbo's done took some pics,
 

you don't need a vacuume manifold. just get some 5/16" plastic Ts' and T off the pcv valve and charcoal emissions filter canister ports on the intake manifold. those are powerful boost vacuume sources. the car looks pimpin and clean. ;D

Re:turbo's done took some pics,
 

any idea why im running so rich?

im getting 12mpg :(

and did i hear that correctly? you want me to tee off the vacuum going into the charcoal canister? wich hose do i tap into i think there is 3 a red hose and 2 blackys

Re:turbo's done took some pics,
 

i wish i would of know that you were going to sema or i wouldnt of ordered from you, i expected to get my parts some time today :( since i bought from u at like 8am on tuesday :(

Re:turbo's done took some pics,
 

bump for awnsers