turbo 92 hatch (new pics w/B18c/TO4S/FMIC)
08-22-2005, 10:59 PM
#1
0.0 BAR
Thread Starter
Join Date: Aug 2005
Posts: 27
turbo 92 hatch (new pics w/B18c/TO4S/FMIC)
SCROLL DOWN FOR NEW PICS W/B18c/TO4S/FMIC
Well I thought I would put some pics up of my car for my first post. I have been lurking for a while and this is actually where I found out about uberdata. The setup was done on the cheap just for fun. All said and done I have about $2500 in everything including the car. Yes that is the crappy ssautochrome manifold(good thing i have a welder) and a ssautochrome wastegate(very impressed once I pulled it apart and retightened ever nut and setscrew). The turbo is actually an oem K27 off of a ford truck according to the partl # on it. I did spend some cash on the PWR air to water IC because I wanted to try it. I made all the ic piping from stuff I had laying around the shop. The exhaust is pieced together from chopped up silvia and gtr junk exhausts 76mm all the way back to the hump where it goes to 70mm and then into an rsr oval. I'm running rx7 550cc injs with uberdata, a TE wbo2 and a Cosmo 20b pump. The motor is a bone stock b16 out of an automatic. For clutch I went with a Competition stage 5. The drivers seat is a carbon kevlar recaro from an fd(probably worth more than anything else in the car).
It's dirty I know, but the last time I looked clean didn't make you faster.
Don't tear me up too much please.
Well I thought I would put some pics up of my car for my first post. I have been lurking for a while and this is actually where I found out about uberdata. The setup was done on the cheap just for fun. All said and done I have about $2500 in everything including the car. Yes that is the crappy ssautochrome manifold(good thing i have a welder) and a ssautochrome wastegate(very impressed once I pulled it apart and retightened ever nut and setscrew). The turbo is actually an oem K27 off of a ford truck according to the partl # on it. I did spend some cash on the PWR air to water IC because I wanted to try it. I made all the ic piping from stuff I had laying around the shop. The exhaust is pieced together from chopped up silvia and gtr junk exhausts 76mm all the way back to the hump where it goes to 70mm and then into an rsr oval. I'm running rx7 550cc injs with uberdata, a TE wbo2 and a Cosmo 20b pump. The motor is a bone stock b16 out of an automatic. For clutch I went with a Competition stage 5. The drivers seat is a carbon kevlar recaro from an fd(probably worth more than anything else in the car).
It's dirty I know, but the last time I looked clean didn't make you faster.
Don't tear me up too much please.
LOL
