Thank You All! NOW WITH PICS!
Well, I finished my set up this afternoon late with a buddy. Set up is:
96 Civic CX hatch Y7 engine Y8 intake 3 wire to 2 wire IAC conversion OBDIIa to OBDI harness Chipped P06 UBERDATA DSM 450 blue tops Turbo manifold made by ME! Saab T3 42/48 Johnny racecar 5" FMIC 2 1/2" IC piping made by ME! 1G DSM BOV tons more mods not turbo related. I would just like to thank all the people that have answered my questions and have posted useful info. It runs decent but only built 3 psi. I have to adjust the waste gate but its dark now. It builds boost around 2600 rpm with an open DP. Will get pics tomorrow after work. Thanks Again David P.S. scctydb411 I'm currently using your map and it works for me. Idles crazy rich though. Thanks for a good starting point. |
Re:Thank You All!
pics?
|
Re:Thank You All!
Tomorrow night.
|
Re:Thank You All!
Night no good... too dark... We need pics... Now! ;)
Nah, sounds like a sweet setup. What are your power expectations? |
Re:Thank You All!
Gonna run 8 psi. Whatever power I made at 8 psi is fine. Hoping 160 at the wheels.
|
Re:Thank You All!
I doesn't go anywhere but it sure sounds cool HAHAHAHA!
Just kidding Dave, I've been taking too many crazy pills.. |
Re:Thank You All!
that's great...welcome to the club.
that map will lean out once you warm up from driving. |
Re:Thank You All!
Thanks again scttydb411. I also have Pat's(BBKA) map but his is VTEC so I have to change it a bit. Now if I can get my brand new clutch not to slip! I will post it seperate.
|
Re:Thank You All!
I cant wait to see pictures!!!
|
Re:Thank You All!
These are in no particular order.
Gauges at dusk. http://1.pichold.com/dscf0158.jpg front minus my Type R grill http://1.pichold.com/dscf0162.jpg Side view, yes its gonna see paint some day http://1.pichold.com/dscf0163.jpg self explanitary http://1.pichold.com/dscf0165.jpg Flat black hides welds well! http://1.pichold.com/dscf0166.jpg |
Re:Thank You All! NOW WITH PICS!
very nice
|
Re:Thank You All! NOW WITH PICS!
can u take a close level shot of the intercooler iam trying to figure out if i need a 5 or 6 thank you.
oh yeah take out ur battery so u can get to the rest of the a/c lines, looks kinda goof just sitting there zip tied. |
Re:Thank You All! NOW WITH PICS!
If you have the same front end ,a 6 is a waste. I will get you the pic. OH yeah I upped the boost to 5.5psi this afternoon. Much better but I have to run out my crappy gas before I go to 8!
|
Re:Thank You All! NOW WITH PICS!
thank you man looking good iam going same route in my 96 hatch but iam going for t25
did you have to cut out bottom grill to get it too fit? |
Re:Thank You All! NOW WITH PICS!
I just took some close ups but its too dark now. I only had to cut the cross pieces and some of the perimeter out. The bottom was fine. I also had to cut most of the inner fenderwells out and the rest rubbed out on my first couple times out! ;D
|
Re:Thank You All! NOW WITH PICS!
should left those little black blocks on the end to cover the endtanks buts that my opinion
|
Re:Thank You All! NOW WITH PICS!
Would not fit I tried. I had to cut a ton out of the front and I still have a bit of shaping to do.
|
Re:Thank You All! NOW WITH PICS!
nice red x's mang
|
Re:Thank You All! NOW WITH PICS!
Originally Posted by BoosTedZSix
nice red x's mang
|
Re:Thank You All! NOW WITH PICS!
"bandwidth limit exceeded" oops...
|
Re:Thank You All! NOW WITH PICS!
send ur pics to mike@biggmike.net and ill host them for u
get me that picture i asked for first though :P |
All times are GMT -5. The time now is 01:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands