I just got a set of 91 supra injectors and i was wondering if i would hook them up just like i would 450cc dsm injectors. I herd that they were 550cc and i need to know if maybe that is a little to big. Any help would be apreciated. THANKS

 

What car/engine?

 

t3.. lookit his name!

 

arent those side feed injectors?

 

Look at my name...Think I have a t3?


The injectrors are peak and hold and I dont know if ls is peak and hold or what so I cant tell..


edit: bold

 

Hey Hey Hey no fighting now. I have a 96 integra ls motor in a 96 civic ex. Thanks for helping guys.

 

Just messin :P

1988-'91 Supra Turbo Peak and Hold 550cc

Depending on where you got the Ls, just match em up.


1990-'91 Integra RS/LS/GS Peak and Hold 240cc
1992-'00 Integra LS/GS Saturated 240cc

Wont fit...Unless you can put sat n a pk and hd type setup which I have no clue.

 

the mk3 supra turbo injectors are 440 i belive and you will need a resistor box. the mk4 supra injectors are sidefed and are 550.

 

Jan, so you can wire saturated injectors when it was regular peak n hold just by using a resistor?I got this thread from h-t..Will I needa upgrade the clamps too?

http://www.honda-tech.com/zerothread?id=415342

 

well i dont know how the stock crx ones were if peak and hold or saturated but i just put these on and had to change the clips, they also work on any other civic as long as you have a resistor box, its basically like the eclipse inj.