Some Progress
Got the front end welded back on and painted this weekend. Still have a lot of work to get the ---- box done before BOTI, but I pretty much have all the parts I need to get it done.
The start http://img507.imageshack.us/img507/8468/eg002ck3.jpg Parts storage Note the SSAC manifold :X http://img507.imageshack.us/img507/2703/eg003wf7.jpg Gutted ready to start on the cage. http://img507.imageshack.us/img507/1185/eg004pf3.jpg Art Morrison 8pt cage http://img170.imageshack.us/img170/3176/eg054hf9.jpg Progress on the cage, Its pretty much done now i just dont have any recent pics http://img507.imageshack.us/img507/818/drz015bt3.jpg Race cars have to have a race seat right? :P http://img530.imageshack.us/img530/5092/drz016jp1.jpg Radiator support welded back on along with pass side mount. http://img507.imageshack.us/img507/2232/drz017ye1.jpg Engine bay painted http://img530.imageshack.us/img530/7081/eg006qf1.jpg I had to re-paint the front end of the car, paints ------- expensive so i just half assed it :l http://img530.imageshack.us/img530/5268/eg014rq3.jpg Basic run down of what the Motor setups going to be Ls-vtec GSR cams Weisco pistons/Eagle rods 1000cc injectors 255hp walbro Victor X IM GSR tranny with OBX diff |
Re: Some Progress
very nice
better break into the 10s |
Re: Some Progress
solid
|
Re: Some Progress
I used to think I disliked fresh paint and clean engine bays. I have come to realise I dislike slow faggot cars with fresh paint and clean engine bays.
Props. |
Re: Some Progress
Originally Posted by Joseph Davis
I used to think I disliked fresh paint and clean engine bays. I have come to realise I dislike slow faggot cars with fresh paint and clean engine bays.
Props. |
Re: Some Progress
Nice ----, I wish I had a car with fresh paint sometimes...
|
Re: Some Progress
bah. fresh paint sucks. then your worried about where you park, how clean it is, the neighborhood faggot who lets his kids toss a ball into your car, etc.
looks like you have a lot of work ahead of you. |
Re: Some Progress
WTF bro... Widebody get at your brain???
http://img507.imageshack.us/img507/2703/eg003wf7.jpg LOL... I kid... I Kid... Hope to see you out there man! I hope I make it in time too.. |
Re: Some Progress
Props for you guys making it out to BOTI
|
Re: Some Progress
Originally Posted by bigdaddyvtec
WTF bro... Widebody get at your brain???
http://img507.imageshack.us/img507/2703/eg003wf7.jpg LOL... I kid... I Kid... Hope to see you out there man! I hope I make it in time too.. |
Re: Some Progress
id leave it red just for the ricer look. Then smoke some mo fos
|
Re: Some Progress
Originally Posted by chris
Props for you guys making it out to BOTI
|
Re: Some Progress
Was the towing auction a local little one or a national one. I have had good luck with the locals
|
Re: Some Progress
Originally Posted by chris
Was the towing auction a local little one or a national one. I have had good luck with the locals
|
Re: Some Progress
---- i tested my clutch on the bench today slips at 250FT LBS, I need to find something diffrent :7
|
Re: Some Progress
I have an act b series plate w/ itr disc not sure what the hell its rated for though. Dirt cheap for ya if money is tight Ill hook it up
Plenty of meat left on it. |
Re: Some Progress
Originally Posted by chris
I have an act b series plate w/ itr disc not sure what the hell its rated for though. Dirt cheap for ya if money is tight Ill hook it up
Plenty of meat left on it. |
Re: Some Progress
Originally Posted by 88dx
---- i tested my clutch on the bench today slips at 250FT LBS, I need to find something diffrent :7
|
Re: Some Progress
Originally Posted by highroller54
what did you use for testing? Car looks good, keep the updates coming :1
|
Re: Some Progress
Originally Posted by 88dx
I should take some pics of how I do it. I cut a crank off welded a 2" square tube to is so i can put it in the vice then i tq the flywheel and PP to that then I cut a imput shaft and welded a Nut to that. I have a TQ wrench at work that goes up to 600ftl LBS
|
Re: Some Progress
Originally Posted by 78NOVA
is that even the way they are tested? to me that seems mighty easy to do.......if clutches are that weak wtf?
stock clutches cant handle stock power so ya there that weak I never even touch a motor swap unless it gets a nice act clutch just not worth half assing ----. stock clutch+slicks=fail |
Re: Some Progress
Originally Posted by 88dx
I should take some pics of how I do it. I cut a crank off welded a 2" square tube to is so i can put it in the vice then i tq the flywheel and PP to that then I cut a imput shaft and welded a Nut to that. I have a TQ wrench at work that goes up to 600ftl LBS
oh and thats ------ cool |
Re: Some Progress
Originally Posted by 88dx
I should take some pics of how I do it. I cut a crank off welded a 2" square tube to is so i can put it in the vice then i tq the flywheel and PP to that then I cut a imput shaft and welded a Nut to that. I have a TQ wrench at work that goes up to 600ftl LBS
|
Re: Some Progress
Originally Posted by 88dx
I should take some pics of how I do it. I cut a crank off welded a 2" square tube to is so i can put it in the vice then i tq the flywheel and PP to that then I cut a imput shaft and welded a Nut to that. I have a TQ wrench at work that goes up to 600ftl LBS
|
Re: Some Progress
Originally Posted by crxvtec91
Write up with pic's for Xeno write up.
|
Re: Some Progress
Originally Posted by xenocron
Seriously good idea...would love to see that!
|
Re: Some Progress
Paint the whole dash red or ur a -----.
|
Re: Some Progress
Originally Posted by Cray91
Paint the whole dash red or ur a -----.
|
Re: Some Progress
Updates nog?
|
All times are GMT -5. The time now is 06:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands