some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
well, i found some low compression in two cylinders a little over a week ago, so saturday i tore everything down and found two broken ringlands, i was too busy the rest of the week to get it back together, so i went running around after work yesterday to pick up everything i needed (some misc. bullshit so i wouldn't have to run to the store in the middle of the operation), and got straight to work. i finished at 5am this morning and drove straight to work, where i sit right now wishing i was dead :P the pics....... btw, grand total for rebuild 40 bucks (was short one piston, so i had to pick one up from a shop)
all looks good from above, no scarring on the cylinders, but i gave them all a good hone anyways. [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb1.JPG[/img] [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb2.JPG[/img] what i found upon removal of pistons (#2 and #3 in this condition) [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb3.JPG[/img] the 'shitty little carport' as spenser would say, littered with parts, notice the oil pan once again :) i actually replaced it while i was in there, so, no more double tapped pan for me, i may sell it on ebay. also, notice how the intercooler is shoved behind the bumper support :P [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb4.JPG[/img] intercooler fixed as well ;) [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb5.JPG[/img] my 'projekteg firewall kit', local machine shop sells earls fittings, so it only cost me 8 bucks and solved my leaky oil pressure gauge as well, as opposed to having the gauge and feed line crammed on the block fitting. [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb6.JPG[/img] i didn't take any pics of the real 'process', i was by myself and just wanted to get the ---- done. i pulled a real 'jeff frank' rebuild. reused head gasket with copper spray, had a good piston laying around and bought another used one, quick hone job with block in the car, re used rings, re used oil pan/valve cover gasket :) i have a feeling it's gonna hold up really well, just one of those 'holy ----, i can't believe that thing's holding up' type of deals. putting it back together.... [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb7.JPG[/img] i cleaned a lot of ---- since my engine bay was trashed from driving for a day with no dp at all (covered in soot), as well as removed a bunch of factory clips/brackets i wasn't using any more, along with a bunch of emissions bullshit, also installed my fpr i had laying around. [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb8.JPG[/img] all cleaned up and looking nice, the money shots!!!!....... [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb9.JPG[/img] [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb91.JPG[/img] [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb92.JPG[/img] [img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb93.JPG[/img] i'm glad i got the chance to clean everything up and fix all the bullshit i fucked up when i was so drunk doing my install. i wasn't happy with how things were after the install (looks anyways), but now i'm more than pleased with how it turned out. i drove to work this morning and took it kind of easy, no long boost pulls, but did boost quite a bit, and it feels much stronger than it did with two broken pistons :P my new slicks are in the trunk, i'll go snap a pic later, hopefully have em mounted by next thursday to run at the track again. |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hot
ita all nice and clean now..wanna clean my car kevin?
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
nice
how did u press out te pistons? |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by Ravage70
nice
how did u press out te pistons? |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
nice to see it going again.now lets see some 11's
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by projekteg
notice how the intercooler is shoved behind the bumper support :P
[img width=400]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb4.JPG[/img] |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by import jedi
nice to see it going again.now lets see some 11's
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
How are you gonna get the bumper cover to fit with the intercooler in the way? I have a wings west avenger bumper here for ya, painted red and everything. ;)
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by Stan
How are you gonna get the bumper cover to fit with the intercooler in the way? I have a wings west avenger bumper here for ya, painted red and everything. ;)
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
got hossiers? ;D
[img width=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/slick1.JPG[/img] [img width=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/slick2.JPG[/img] [img width=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/slick3.JPG[/img] |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
I assume you replaced all 4 pistons right?
If you didnt, I wouldnt press your luck to far with the other 2 pistons, even though they were not cracked/broken I wouldnt be beating the living ---- out of them. Dealing with cracked ring lands isnt that tough, its just when you have to do it so many times it becomes a PITA. btw, I never suggest re-using head gaskets... thats a beau garrison trick, not jeff frank ;) Good luck, |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by AbaZ
I assume you replaced all 4 pistons right?
If you didnt, I wouldnt press your luck to far with the other 2 pistons, even though they were not cracked/broken I wouldnt be beating the living ---- out of them. Dealing with cracked ring lands isnt that tough, its just when you have to do it so many times it becomes a PITA. btw, I never suggest re-using head gaskets... thats a beau garrison trick, not jeff frank ;) Good luck, |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Eh, it will probably be fine. Beau has reused his headgasket on his race car like 3 times. Same head gasket 28-30psi still holds. It has a little bit of seapage in the right corner, but not bad.
The one time I re-used one it blew. |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hot
Copper spray ownz my headgaskets. I don't remember the last time I bought a new headgasket. MLS gaskets are god's gift to a poor HMT member. 8) Seeing that just wants me to install my kit in my 4dr that has a barely noticeable knock but ---- it! This week it's on and thank god I got a stepdad with a car trailer and I"ve got a second car ;)
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hot
Good to see another car back on the road. And yes having a car port would be the suck.
Those are just not an option in the north. |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
carport looks pretty nice, i have a tent and a 6 car driveway with a garage filled with ---- =\
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
I wish I had a car port. I'm probably going to be working on my car this summer with a tarp stretched over some poles so I don't die in the sun.
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
lol, it's just a car port, it sucks, but it's better than nothing :-\
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
hha ive been fisted by everyone lately, its a gang bang..
kev it will be a good race, and u know ill ranomly show up at your house to do it. niog |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Nice Work ....seems every time i work on my car the engine gets cleaner and i end up a grease ball :-\
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by hotrex
hha ive been fisted by everyone lately, its a gang bang..
kev it will be a good race, and u know ill ranomly show up at your house to do it. niog |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hot
[img width=500 height=375]http://www.draglab.com/hmt/projektegdizzle/turbo2/rb4.JPG[/img]
I see you still like to take your pants off during installs ;) (I'm refering to the red shorts on the head) Oh and cute sandals, they fit you well (next to the couplers). |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by projekteg
Originally Posted by hotrex
hha ive been fisted by everyone lately, its a gang bang..
kev it will be a good race, and u know ill ranomly show up at your house to do it. niog Ya those stock turbo b16a's in full bodied coupes are torque monsters :-X quote from dave lee "I'm gonna carry 280ft lbs of torque to 8 grand" HAHAHA :) |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by projekteg
Originally Posted by Stan
How are you gonna get the bumper cover to fit with the intercooler in the way? I have a wings west avenger bumper here for ya, painted red and everything. ;)
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
stan my cooler is bigger and i didnt cut my bumper at all. its very possible
|
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
Originally Posted by AbaZ
I assume you replaced all 4 pistons right?
If you didnt, I wouldnt press your luck to far with the other 2 pistons, even though they were not cracked/broken I wouldnt be beating the living ---- out of them. Dealing with cracked ring lands isnt that tough, its just when you have to do it so many times it becomes a PITA. btw, I never suggest re-using head gaskets... thats a beau garrison trick, not jeff frank ;) Good luck,
Originally Posted by AbaZ
quote from dave lee "I'm gonna carry 280ft lbs of torque to 8 grand" HAHAHA :) Three ------- fifty..... |
Re: some pictures to own hotrex's poop,& why i've been up for 30hrs(56k fist hotrex)
witha hard launch id burn thru 3rd too. i eolled that video on . whatever you say kev, i know how this thing goes.
ima come down there and put a beatin on that red poopie you call a car :P |
All times are GMT -5. The time now is 01:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands