Solid CEL and engine won't start?
 

Got a d15b7 and using uberdata on my p06 ecu. I think i turned off the chip (cuz its got a switch, my friend chipped it for me) so that it runs stock but i got a solid CEL...any ideas?

There's no spark, no pressure in the fuel line so it must be the ecu, i tried to find out the code but nothing flashes. Could the ecu have been chipped wrong?

Re:Solid CEL and engine won't start?
 

If the chip was off the car would start and idle like total crap. Make sure J1 is jumped and go to pgmfi.org to make sure it is chipped right. Who burned the chip? Who wrote the map?

Re:Solid CEL and engine won't start?
 

AFAIK solid cel = ---- up ECU ??
or at least one of the sensors is disconnected from the engine.

Re:Solid CEL and engine won't start?
 

wrong board.


IBTL.

Re:Solid CEL and engine won't start?
 

It doesn't start at all! It did last night though...

I haven't touched any sensors in the engine.

I think i'll try and get another ecu and see if that works

Re:Solid CEL and engine won't start?
 

I tried another ecu and it still don't work. Whats the list of stuff to check now?

Help me guys!