snapped 2 bolts off my head hwo do i
i need help snapped 2 head bolts in my gsr after doing a headgasket on it now i dont have compression so it wont stay on. how do i get the bolts out??? it snapped at the bottom so far down in and i dont know how 2 get them out or wat 2 do!!! plz someone hel;p me out.
|
Re: snapped 2 bolts off my head hwo do i
a drill a few good bits and an easy out, hope you can find an easy out small enough, and hope you dont break the easy out :)
http://www.davesdeals4u.com/AJ%20-%2...0OUT%20SET.jpg |
Re: snapped 2 bolts off my head hwo do i
how the ---- did you snap a head bolt ???
|
Re: snapped 2 bolts off my head hwo do i
Originally Posted by 88dx
how the ---- did you snap a head bolt ???
|
Re: snapped 2 bolts off my head hwo do i
yeah i doubt an easyout will do the trick, only because it doesnt seem like there will be enough to grab onto. Your most likely going to end up having to redrill and tap. How far down in did it break? Is there enough thread showing in the hole that you could put a shorter bolt into it and tighten it without bottoming out onto the broken piece? Its super ghetto, but it might buy you some time until you could get it fixed properly... i dont know if this would really work, but maybe worth a shot
|
Re: snapped 2 bolts off my head hwo do i
JB weld the broken piece on. The head studs are not important, they just the vtec down onto your block. :y
|
Re: snapped 2 bolts off my head hwo do i
Originally Posted by 88dx
how the ---- did you snap a head bolt ???
|
Re: snapped 2 bolts off my head hwo do i
your retarded.
machine shop time. i woudlnt try an easy out on that one. |
Re: snapped 2 bolts off my head hwo do i
You really should just pull the motor and get the block down to a machine shop.You will most likely make it worse by trying to remove it with a easy out or similar.You should buy a torque wrench or get your's calibrated.
|
Re: snapped 2 bolts off my head hwo do i
classic retardation
|
Re: snapped 2 bolts off my head hwo do i
I doubt he wants to pull the motor, an easy out will no do the trick i dont think
Must be another solution using a shorter bolt Good luck BTW- As hard as it would be to snap a head bolt, how the ---- did you manage 2 of them? |
Re: snapped 2 bolts off my head hwo do i
Tighter the better right? Were you planning on running lots of boost and that why you thought you needed to tighten those bolts till they broke?
stock honda head bolts = only use once. |
Re: snapped 2 bolts off my head hwo do i
If you can use the easy out drill the biggest hole you can. Don't just drill a hole and start using it, it'll break. Sadly I know.
|
Re: snapped 2 bolts off my head hwo do i
did you try using som C4 explsives to get the bolts out? mayne you should.
|
Re: snapped 2 bolts off my head hwo do i
Originally Posted by daubleaaron
Tighter the better right? Were you planning on running lots of boost and that why you thought you needed to tighten those bolts till they broke?
stock honda head bolts = only use once. |
All times are GMT -5. The time now is 10:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands