Skinny E Turbo Progess Pics 56k Maybe
 

Well skinny E is unable to use the internet at this moment, and since i have the pictures on my camera. I guess I'll be the one to post his progress pictures. We are slowly making progress its been 6 days I beleive and still now done, but that's because we are taking our time and only working a few hours a day.

Turbo he is using off a DSM
Attachment 37983

Car up on jack stands
Attachment 37984

The Engine bay mock up. (yes the intercooler is going where the battery used to be)
Attachment 37985

BOV welded by his brother covered in JB Weld
Attachment 37986

Battery Relocation
Attachment 37987

Battery shut off switch for track use
Attachment 37988

Battery switch under panel
Attachment 37989

The switch fully covered for daily driving
Attachment 37990

Thats pretty much what we got done, besides most of the tear down. We got the DSM mani to fit the F block
the oil pan is off and ready to be tapped. A/C is out. Block is grinded down to fit the turbo.
We still got alot to do more pics to come

Re: Skinny E Turbo Progess Pics 56k Maybe
 

That switch location is trick. Did you just drill out the spotwelds to get the panel off? Thats hottness. Looks good soo far

Re: Skinny E Turbo Progess Pics 56k Maybe
 

that panel actually is just bolted on. take out the bolts drill a hole in the middle so it fits in between brackets and it fit perfectly. then he can leave it on when hes around town, no one will no its there and shut off the battery, unbolt the panel at the track and make it pass the safety check

Re: Skinny E Turbo Progess Pics 56k Maybe
 

I love that color on that accord! 8) Nice job so far.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

looking good. Is there gonna be any air ducting/vents/scoops/ect. for the IC?

Re: Skinny E Turbo Progess Pics 56k Maybe
 

ahaha, im doing the same thing with my saab intercooler because im to lazy to route pipes all the way around. i thought about cutting little vents in my hood with fins to push air down onto it also.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

i would get a battery box haha im damn sure you would not pass tech with that ----. 6 days and you havent finished. i think you guys deserve a prise ;D

Re: Skinny E Turbo Progess Pics 56k Maybe
 

there is a battery box in the trunk. we have that covered. the only reason its taking so long is because both of us work at night so we usually work on it like 2 hours get some stuff done and then go to work. and we didnt work on it at all saturday or sunday

Re: Skinny E Turbo Progess Pics 56k Maybe
 

Plus I have the wrong ecu I found out and have to find one >:( I wish I would have known this before I started, I miss my honda my hyundai sucks it get good mpg but its gay. Plus like volumking said we work on it like an hour or two a day and this weekend I was busy the whole time since it was back to the fifties, my freinds had parties, and it was fathers day as long as its done by this weekend I'll be happy.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

yes that is a battery box and it is properly mounted I even used a fuse.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

My buddy Mike just blew up his engine. He returned it to stock and has a P06 with a chip burned for the t25. Give him a call at 952-393-6269. Tell him Colin gave you the number.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

nice job so far, i myself am hoping to build up a turbo f22a/DOHC f22b in the near future :)

Re: Skinny E Turbo Progess Pics 56k Maybe
 

What are you using for fuel management? Looks great!

Re: Skinny E Turbo Progess Pics 56k Maybe
 

uberdata for the fuel management darksol has my basemap and was going to put the chip in when we realized I had the wrong ecu.
Colin I called that guy and he wanted $110.00 for a p06 thats a bit too high.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

My cousin says he's definitely going to be turbocharging his car this summer (hopefully he goes through with it) and we were planning on using Uberdata, but what basemap did you use?

Re: Skinny E Turbo Progess Pics 56k Maybe
 

PM darksol2005 he's the one I'm letting handle that stuff, he works for monster energy drink. Plus I helped him buy a wideband so we can learn how to tune. He just came to me one day and said he had a base map for an fblock so I was like lets do it up.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

Thanks, done :D

Re: Skinny E Turbo Progess Pics 56k Maybe
 

;)

Re: Skinny E Turbo Progess Pics 56k Maybe
 

Got more done today gotta go to lowes to pick up couplers and hose clamps, chris I still can't get that damn oil pressure sending unit off oh well. I figured out the rest of the oil lines.

Re: Skinny E Turbo Progess Pics 56k Maybe
 

Get some from Stealthmode

Lefty Loosey- come on skinny, you can do it.

Otherwise, looking good.