Shots of a Billet D-series Manifold
#1
Shots of a Billet D-series Manifold
Thought some of you D-series guys might like to check this out
A guy sent me these pics, he made this on a CNC machine, milled from 2 solid steel billets, took him a little over 5 hours.
Whats your guys thoughts?
Jeff
A guy sent me these pics, he made this on a CNC machine, milled from 2 solid steel billets, took him a little over 5 hours.
Whats your guys thoughts?
Jeff
#5
Re:Shots of a Billet D-series Manifold
The manifold is a first attempt at this manufacturing method. It went quite well but as you can imagine, I will be making some changes!. The manifold was designed in solids using master CAM software and a machining program was produced from the drawings to control the CNC machining center. The first one actually took quite a long time to machine but I think it can be done quite quickly if I were to set up and machine several at once. I am setting up a website and will be producing external waste gates, blowoff valves, intakes (these will blow you away,v trick!!) and anything else that comes to mind.