24boosted

LOL !!
http://www.dsmloggers.com/stuff/sscrap.jpg
http://www.dsmloggers.com/DSM/ssturbo1.jpg
http://www.dsmloggers.com/DSM/ssturbo2.jpg
http://www.dsmloggers.com/DSM/ssturbo3.jpg

Dmx20

you're kidding right? I didnt know there were still people on the internet who hadnt seen that. Congrats for the most idiotic repost ever

24boosted

Calm down buddy not everyone spends their life online.

Cadracer

Thanks for the repost i havent seen those pics.I have only heard of there stuff splitting an breaking.....

N1ghtM0nkey

Good repost, who cares. I hadn't seen the first pic before.

turbohf

repost of the same problem...not the same guy though....there are a hundred post on honda-tech about people breaking cams, no one says those are repost

Tom-Guy

Then he braced the turbo. Look closely - that brace is spelled M - A - N, it was not some ****** ----- ----. 1"X2" RHS tube.





You know what the SSACrap did? Formed a big fat quarter sized hole in the top center of the collector where all four runners are welded into that stamped steel pile of goatwang called a collector.

FYI - This setup made 340 whp corrected off 12 psi, had one or two 22 psi hell runs getting the boost controller dialled in.

bumblezc

MMM, now isn't that easier. Plus most of us have seen these before, especially the glues turbo

Tom-Guy

You know, if someone gave me that SSACrap/XS power turbo for free, I'd glue the compressor housing back together and run a tiny c-clamp or two on it. It would most likely fall apart in a thousand miles, but a free turbo is a free turbo.

Ravage70

jb weld would hold it
hell u could even tig it back