Setting engine to TDC without a socket for the crank pulley
I had my car in my college auto shop and I was replacing a blown head gasket.. I think I might have put my distributor in a tooth off.
The shop is now closed for finals, so I don't have access to all their tools. I borrowed a craftsman tool set from my friend, but usually I set my motor at tdc with a big ass socket that I don't have access to now. Any other ways to set the motor to tdc without a crank pulley socket? 240sx ka24de |
Re: Setting engine to TDC without a socket for the crank pulley
buy a socket, they don't cost that much. you'll probably need it again anyways
|
Re: Setting engine to TDC without a socket for the crank pulley
You dont need a crank pully socket. Just a socket big enough to fit on the bolt holding the poully in place. If I remember rite its like a 17mm or so.
|
Re: Setting engine to TDC without a socket for the crank pulley
ya.. it's a 27 on my car.. that's the one im talking about
I have one at home, but not down here at college.. and I'm going home on thursday for a month. so if i don't neeeeeeeed to I dont want to get one |
Re: Setting engine to TDC without a socket for the crank pulley
why can`t u turn it by hand?
|
Re: Setting engine to TDC without a socket for the crank pulley
might be able to.. it's kinda a bitch.. kind of an obvious and good idea though
|
Re: Setting engine to TDC without a socket for the crank pulley
just pull the plugs, give it a try
|
Re: Setting engine to TDC without a socket for the crank pulley
pull the plugs and turn it by hand you mean?
|
Re: Setting engine to TDC without a socket for the crank pulley
yep
|
Re: Setting engine to TDC without a socket for the crank pulley
or buy one from advance auto parts, they will return it when ur done, no questions asked. Kind of skeevy I know but I used to work there and advance can burn in hell.
|
Re: Setting engine to TDC without a socket for the crank pulley
If you get the CSK/Vatozone brand it will be <$10 and save you some time. Just buy it. :P
|
Re: Setting engine to TDC without a socket for the crank pulley
Originally Posted by alpalwal
might be able to.. it's kinda a bitch.. kind of an obvious and good idea though
|
Re: Setting engine to TDC without a socket for the crank pulley
just use the starter to turn it :1
|
Re: Setting engine to TDC without a socket for the crank pulley
use your teeth
|
Re: Setting engine to TDC without a socket for the crank pulley
Pull the plugs so you are not dealing with the compression with cranking it over. You should be able to do it with your hands or use a old assc. belt for some leverage.
|
All times are GMT -5. The time now is 01:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands