serious wiring problems
03-06-2003, 10:04 AM
#12
1.0 BAR
Join Date: Dec 2002
Posts: 220
Re:serious wiring problems
i just did that swap actually....it took us about a week to get the wiring right....its a pain in the ***. we took out the si motor and trans from a beater si and put a good dpfi motor and 4 speed manual into it. he bought the si for 700, we did some body work and the motor swap and sold if for a grand...it worked out nicely. then he sold the si motor, kept the tranny, and financed his whole zc swap into his car. anyways, i'll try to get a wiring diagram from him, he was the one that got it right finally. i'll post it tonigth if i can get ahold of him. he made a little diagram, if you can, get the schematics from both motors and compare them, thats what we did. we DID put the standard motor harness on the si, we cut the main plugs and just soldered the right stuff to the right place. made the only standard civic with a sunroof and a rear wiper(i stole the mint interior for my standard model!HEHEHEHE)
03-06-2003, 12:24 PM
#14
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:serious wiring problems
i do read the questions like "what turbo would be good for my b16a?"
if u ask me buddy anyone on here will tell that guy to search for his answer, we aint doing the work for you/him.
i am not going to provide help to some idiot who doesnt know what a turbo is.. go learn.
also you. i try to help then u call me a dick?
---- off.
if u ask me buddy anyone on here will tell that guy to search for his answer, we aint doing the work for you/him.
i am not going to provide help to some idiot who doesnt know what a turbo is.. go learn.
also you. i try to help then u call me a dick?
---- off.
03-06-2003, 12:32 PM
#15
Guest
Posts: n/a
Re:serious wiring problems
Yes, I believe we're all wondering why you want to do the SI to DX, but anyway.. if you realyl WANT to, you'll have to do the DX to Si BACKWARDS.. and use a PM5 ECU, since your PM6 won't power a DPFI..
Plus, you'll need a different distributor.. unless the SI can work without a complete circut to the TDC and CYP sensors..
Plus, you'll need a different distributor.. unless the SI can work without a complete circut to the TDC and CYP sensors..
03-06-2003, 12:58 PM
#16
1.0 BAR
Join Date: Dec 2002
Posts: 220
Re:serious wiring problems
if you use the si harness, it will be si to dx backwards, that wont be too tough.....i would do that if i were you. dont use the dx harness, i did it and i regret it. be basically made our own harness, and it sucked.
03-06-2003, 02:37 PM
#17
0.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 74
Re:serious wiring problems
shortz sry i read you post wrong the first time, it looke dlike you said try to search , some people find that hard, as in searching hard, anyway sry bout that, i told the guy that his harness wasnt going to go on to the car because it was an si, so he is starting to peice together a mpfi setup for it
redzcstandardhatch:
if you can find that diagram will you please post it, i might do that if it is possible
redzcstandardhatch:
if you can find that diagram will you please post it, i might do that if it is possible
03-07-2003, 12:50 AM
#19
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:serious wiring problems
Originally Posted by 1slowcivic
shortz sry i read you post wrong the first time, it looke dlike you said try to search , some people find that hard, as in searching hard, anyway sry bout that, i told the guy that his harness wasnt going to go on to the car because it was an si, so he is starting to peice together a mpfi setup for it
redzcstandardhatch:
if you can find that diagram will you please post it, i might do that if it is possible
redzcstandardhatch:
if you can find that diagram will you please post it, i might do that if it is possible
no problem.
sorry
Thread
Thread Starter
Forum
Replies
Last Post
Nirgopolis
General Discussion
17
12-15-2008 07:09 AM
