Radius Arms on Traction Bars.
 

I'm at the point of mounting and Fabricating the radius arms on my traction bar.
Looking through post pictures I was wonder if I should use 4 rod end bearing(one at each end) or just two?
2 would be easier for me but I want to know if they work fine or not?

Example Pictures
2 Rod ends
http://www.mmrusa.com/dsrcrossmember.jpg
http://www.jimfab.com/susp/crossm1.jpg
4 Rod ends
http://full-race.com/store/images/crxtb.jpg

By using 2 rod ends I save myself a bit of fabricating and money.

Re:Radius Arms on Traction Bars.
 

I used 1 on each end. 4 total. You will only save a few bucks and may have lots of bind. I just noticed you are 88-91 so it may be different.

Re:Radius Arms on Traction Bars.
 

I would use 4 for the added articulation, just incase your math is a little off. ;)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Radius Arms on Traction Bars.
 

2 should be a little hard to adjust correctly. I say 4 is good