Price Estimate Please (Entire Kit)
Hello,
Seeing as how I have somehow hard core fucked my current motor I feel its time to get away from Honda performance entirely. To costly, and really not worth it for me while still trying to pay for school! Maybe in ten years I'll build up another one but for now I just can't afford it. This is my entire setup with everything that I can think of currently, there is probably more but basically if you were to buy this I don't believe you would need ANYTHING more then this. This kit is currently installed a 1997 Del Sol S, running a d16y8 block, and a d16z6 head. The car has been converted to OBD1. ----- TURBO ----- Ported Greddy Exhaust Manifold Ported D16Y8 Intake Manifold Ported Greddy Internal Wasteagate Greddy TD04H-15G Turbo Greddy Type-S Blow off Valve Saab SMIC Greddy 2.25" Down Pipe ----------------- ENGINE MANAGEMENT ----------------- Apexi S-AFC with wiring harness P28 (OBD1 SOHC VTEC) 450cc Fuel Injectors CRX Resistor Box OBD2 to OBD1 Conversion Harness --------------- WATER INJECTION --------------- Gravity fed 100 GPH Pump Reservoir for water injection Tubing/Rubber hoses to set up reservoir in trunk Boost Pressure Sensor (min. 2 psi, max 14 psi) Main Relay for Water Injection Water Solenoid Water Nozzle Nozzle Fitting ------ GAUGES ------ Air/Fuel Gauge Boost Pressure Gauge Gauge Tri-Pod for Del Sol ---- MISC ---- Brass 'T' Fitting Oil Feed/Return Hoses Oil Pan tapped for turbo Charge Pipes (fitted for Civic/DelSol) - Includes intercooler piping/mounting - Includes all rubber hose clamps and O-Clamps 3" Exhaust - Includes resonated glass pack muffler (where factory resonator sits) - Converted from 2.25" to 3" Exhaust after Hi-Flow Catalytic converter Vaccuum lines and 'T's D16Y8 Throttle Cable (Brand New) 5 qts of oil (10w30) Honda genuine oil filter and washer Honda genuine key chain How much do you think a fair price for all of this would go for? I really don't want to seperate any of it (maybe the parts that are specific to a Honda Del Sol [the exhaust] and some of the other misc crap). |
Re:Price Estimate Please (Entire Kit)
With intake manifold it would include fuel rail, and the throttle body.
|
Re:Price Estimate Please (Entire Kit)
I'll give you 30 dollars for the greddy downpipe.
|
Re:Price Estimate Please (Entire Kit)
No, no. This is a whole as is offer, not going to piece it out.
|
Re:Price Estimate Please (Entire Kit)
wow thats a lot of good stuff, put it on ebay you should get a good amount.
400 posts! yipeeeeee! ;D |
Re:Price Estimate Please (Entire Kit)
Gimme a ball park value though Renr? $1700 to much? to little?
|
Re:Price Estimate Please (Entire Kit)
you could prolly get around 1700 on ebay
|
Re:Price Estimate Please (Entire Kit)
If I was looking for a kit, i would give you almost 2000 for all that. I have the same turbo btw on my sol. It's nice :) 1700 is a very fair asking price imo. I think you could get more.
|
Re:Price Estimate Please (Entire Kit)
for a kit that complete you could get 1700, maybe more
|
Re:Price Estimate Please (Entire Kit)
Thanks guys, I really hate to do this but I don't think I can afford to be playing with cars when I'm only 20 years old and trying to get through school and unemployed!
Though its going to suck not being able to keep up on all the hip rice lingo :) |
Re:Price Estimate Please (Entire Kit)
...My heart goes out to you...Three years ago I painted my poor rex, and then gave up modding it (and snowboarding too!) for school as well, couldnt afford both.
Now, the good news......now that I am out with a decent job, Ive got money burnin a hole in my pocket, and an almost stock ZC CRX in the driveway, looking to tear it into pieces (as soon as I get done with my other car, a '75 280C merccedes)....Which means I am interested in your buying your setup...all of it. How soon do you need money? I really dont need the stuff right away....would you take a deposit for holding on to it for a month or two? I'd like to work out a deal with you, seems like a lot of quality stuff there. Get ahold of me @spdyjay@hotmail, oh the name is James btw... |
Re:Price Estimate Please (Entire Kit)
Ill give you fifty bucks and my little sister for it
|
Re:Price Estimate Please (Entire Kit)
ADD TO THE LIST:
GM 3 Bar MAP Sensor Bolts/Nuts (whatever doesn't get lost) |
Re:Price Estimate Please (Entire Kit)
I seem to have lost the little part that goes on the wastegate actuator and attaches to the wastegate though, does anyone have a clue where the hell I can get this? I've contacted Greddy but I hate that company with a passion. :P
|
Re:Price Estimate Please (Entire Kit)
greddy will not sell you ---- individually only in kits
|
Re:Price Estimate Please (Entire Kit)
Well I've decided I'm going to keep the car but all this is going to be coming off, and I'm going to build the car into the ultimate street machine with a turbo h22a (yeah I know everyones gonna tell me I'm stupid for trying but I'm going to anyway).
As soon as I can pick up a new car for my daily, I'll be pulling all this off and listing is anyone interested in purchasing it? |
Re:Price Estimate Please (Entire Kit)
I must add that the wastegate rod has been 'clipped' to fit the turbonetics rod end on, its only able to boost 5 psi without a boost controller.
|
All times are GMT -5. The time now is 05:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands