post ur EF/ED HMT
im getting ideas after to fix my car O0
|
Re: post ur EF/ED HMT
here is mine walter you maybe able to get some ideas from me..
https://www.homemadeturbo.com/forum/...?topic=76073.0 |
Re: post ur EF/ED HMT
Originally Posted by sikcrx89
here is mine walter you maybe able to get some ideas from me..
https://www.homemadeturbo.com/forum/...?topic=76073.0 |
Re: post ur EF/ED HMT
Originally Posted by Walter
awesome! is that EG radiator?
|
Re: post ur EF/ED HMT
ok, good info.. 275hp with stock engine? :o (i didnt think DOHC ZC engine be strong... :8 what power are u making ?
i hope more EF setups :-* |
Re: post ur EF/ED HMT
Originally Posted by Walter
ok, good info.. 275hp with stock engine? :o (i didnt think DOHC ZC engine be strong... :8 what power are u making ?
i hope more EF setups :-* |
Re: post ur EF/ED HMT
awesome.. well my goal if i boost it would be around 220hp :S
|
Re: post ur EF/ED HMT
Originally Posted by Walter
awesome.. well my goal if i boost it would be around 220hp :S
|
Re: post ur EF/ED HMT
yup, it does..what EMS are u runing? just with OBD1 conversion or maybe with turboedit?
|
Re: post ur EF/ED HMT
Originally Posted by Walter
yup, it does..what EMS are u runing? just with OBD1 conversion or maybe with turboedit?
|
Re: post ur EF/ED HMT
that's samething im thinking to runing in..
|
Re: post ur EF/ED HMT
Originally Posted by Walter
i didnt think DOHC ZC engine be strong...
|
Re: post ur EF/ED HMT
My POS LS-T setup was good for 11.67@121 O0
http://img502.imageshack.us/img502/8071/crxaa1.jpg http://img182.imageshack.us/img182/8968/crx2wc9.jpg |
Re: post ur EF/ED HMT
2 Attachment(s)
Here's one of my ED6 for ya Walter...
Attachment 26316 Attachment 26317 Even kept the stock crossmember too ;) |
Re: post ur EF/ED HMT
that's will be my another project after to boost my actual engine.. :P
if u post ur setup would be great too >:D thx |
Re: post ur EF/ED HMT
http://www.honda-tech.com/zerothread?id=1253725
Theres a link to my first turbo setup on my EF. Stock tired a6 9-12 psi on t3 42/48. Not sure of the HP but the setup was good for consistent mid 13's on street tires and TE basemap, probly coulda pulled 13.1-13.3's or lower with a slick and a tune. |
Re: post ur EF/ED HMT
|
Re: post ur EF/ED HMT
very clean! :o what is your setups guys?
|
Re: post ur EF/ED HMT
2 Attachment(s)
'89 HF
sohc no-tec zc block TT i-beams SRP .020 slugs JE Total Seal rings all new OEM bearings, oil pump, blah blah blah z6 HG ARP headstuds sohc no-tec head Delta 272 Blox IM GSR TB thermal gaskets cable SI trans with .702 5th JKMotorsports traction bar OBX LSD Comp Clutch stg 4 6-puck sprung Drag knockoff t3/t4 .48/.60 60 trim ching chong meow 38mm WG 3" DP/exhaust 2.5" charge pipes Ebay bar and plate IC SSQV knockoff RC 550s obd1 conversion - Crome Pro(self tuned) Walbro 255 Motorolla 2.5bar map sensor no dyno sheets, only running 7psi because i just barely hit 500 miles on the breakin. managed a 13.8@104 at that psi https://img.photobucket.com/albums/v...build/fmic.jpg Attachment 26092 Attachment 26093 |
Re: post ur EF/ED HMT
My setup was:
89 Si Hatch D16a6 Motor with 180k+ miles Skunk2 Intake Mani Clutch Specialties 6puck Unsprung Act Prolite 8.4lb Flywheel Custom 2.25" exhaust with dynomax muffler SSAC Crackalicious manifold SSAC Wastegate 42/48 from volvo 740 @ 11-12 psi 2.5" DP with manual cutout StealthNigga Oil lines Racing solutions 2.5" IC piping DSM 450's Galant VR4 sidemount, then a Ebay 6" FMIC Running on misc Turboedit Basemap on Chipped pm6 Car was good for 13.8's all day, easily 13.5 or lower on slicks, and even lower if i ever got it tuned. |
Re: post ur EF/ED HMT
post some pics :D,....
up! for more EF setups! |
Re: post ur EF/ED HMT
maricas! :D
|
Re: post ur EF/ED HMT
Originally Posted by sikcrx89
zc rods can take 250hp easy..
|
Re: post ur EF/ED HMT
Originally Posted by Walter
maricas! :D
|
Re: post ur EF/ED HMT
Originally Posted by julio_bOOstamante
your ringlands however will not. Good luck Though...
|
Re: post ur EF/ED HMT
Originally Posted by sikcrx89
well there is a guy on the zcr that ran his zc daily for 2 years making 300 whp and drove it that way for over 2 years so basically all i can say is its in the tune.. and i will make 300 if it throws a hole in the block >:D
As i said, good luck and i'll beleive it when i see it. |
Re: post ur EF/ED HMT
Originally Posted by julio_bOOstamante
Good for him, now lets soo you do it.... lets go.. what are you waiting for...
As i said, good luck and i'll beleive it when i see it. |
Re: post ur EF/ED HMT
Originally Posted by sikcrx89
when i fianlly finish redoing everything and get it done and tuned ill post what i make not saying mine is going to be as reliable as his but i will hit 300 even it it blows.. it has been,can be,and will be done again by me.. i hope it blows any way then i can tell my wife i have to build it so she will let me spend some more money
but dont ask, tell her you need to build another once it blows! |
Re: post ur EF/ED HMT
Originally Posted by julio_bOOstamante
NIce! :y
but dont ask, tell her you need to build another once it blows! |
Re: post ur EF/ED HMT
Originally Posted by sikcrx89
when i fianlly finish redoing everything and get it done and tuned ill post what i make not saying mine is going to be as reliable as his but i will hit 300 even it it blows.. it has been,can be,and will be done again by me.. i hope it blows any way then i can tell my wife i have to build it so she will let me spend some more money
I alreeady said you could rebuild it if you want. I don't care how much money you spend as long as my car doesn't get put on the back burner. I need some mods too.....lol |
Re: post ur EF/ED HMT
Well you just got $10 so get an ebay intake 8)
|
Re: post ur EF/ED HMT
Originally Posted by jagojon3
Well you just got $10 so get an ebay intake 8)
|
Re: post ur EF/ED HMT
Originally Posted by jagojon3
Well you just got $10 so get an ebay intake 8)
|
Re: post ur EF/ED HMT
Originally Posted by civicgirl98
I alreeady said you could rebuild it if you want. I don't care how much money you spend as long as my car doesn't get put on the back burner. I need some mods too.....lol |
Re: post ur EF/ED HMT
Originally Posted by civicgirl98
Ha ha very funny. I would be happy with the check engine light gone that has been haunting my car for about 4 years now. Oh and the new tranny would be nice ;D
|
Re: post ur EF/ED HMT
Originally Posted by julio_bOOstamante
HA! she already gave you the green light so blow it up already and fix her car in the meantime. BTW what car does she have that you cant clear the CEL?
|
Re: post ur EF/ED HMT
Originally Posted by sikcrx89
EK .. the cat and o2's are giving me problems.. dont ever use SEAFOAM in anything you ever use..
no wonder ive been getting random code 1's....------ o2 sensor. no need for me to worry about the cat, tho |
All times are GMT -5. The time now is 01:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands