krustindumm

quick review:
D16Y8: eagle rods/srp pistons/ge blockguard/arp studs
obx exhaust manifold
SSAC wastegate
nissan T3 turbo
SSQV copy BOV
custom coach intercooler
3" exhaust after DP

jinxy

is this just a sitting around garage project? since you have most of the stuff fit together but not actualy done, like the tack welds on the charge pipes and the 2 bolts holding the exaust manifold on, no harness, etc. looks good. go finish that bitch up

krustindumm

i just finished mocking the piping and came in to eat some food

all the stuff is there except the headstuds which are somewhere in posesion of the USPS.

You missed the valve cover and head, they are from an a6 and are there for mockup and to protect the engine.

heedlessdragger

how much psi?

krustindumm

eleventy billion

mahcivic

please dont tell me that downpipe is gonna be welded straight to the exhuast housing of the turbo

krustindumm

going to be? it is

i snapped all the studs off. I'm going to order a new housing, and when i cut the DP off the old housing it will be about 3/8" shorter. My flange is 3/8" thick.

crx4life2003

HMT-Admin

whats the sweet homemade plate there for in the middle? obviously there is no hood latch

krustindumm

step 1 of a cooling panel. the stock piece was really close to the manifold, so i decided to do that panel. and now i'm going to build a shroud to direct air through the radiator.