Pics of the newest project... [FIXED]
Just thought i'd share a few pics of the new project... as you guys kno i had the DA integ... turbo'd it blah blah. thought i'd try something rwd cuz i was fwd for the past 4 years. on to the pics...
When i frist brought her home... http://www.dotphoto.com/SAN1/13/2B/C...8D5114B4CE.jpg http://www.dotphoto.com/SAN1/92/A4/8...544A240C00.jpg then..... later that night... http://www.dotphoto.com/SAN1/0C/F1/C...3B82DEE055.jpg day time. http://www.dotphoto.com/SAN1/03/23/2...0A34842756.jpg http://www.dotphoto.com/SAN1/5F/71/B...390086FAEB.jpg http://www.dotphoto.com/SAN1/EF/53/1...392EE6C47B.jpg http://www.dotphoto.com/SAN1/7D/8F/3...3541DD34CD.jpg that's bout it. no engine shots cuz its still stock... KA-T in the process... all i need is a manifold and to order some oil lines from stealthmode... not lookin for impossible power jus a lil over stock and to increase the torque a lil more then it already is... ill be sure to take pics of that proces... enjoy and if u could, i <3 the flaming comments.. |
Re: Pics of the newest project...
try again
|
Re: Pics of the newest project...
|
Re: Pics of the newest project... [FIXED]
pretty tight what r ur plans
|
Re: Pics of the newest project... [FIXED]
jus turboing the ka, sr20 injectors(370cc), afc2, 300z fuel filter n fuel pump, sr20 sidemount ic and piping, dsm 1g bov and just about 8-10 psi... not to much hope it holds up. ive seen people boost a lot on ka's but with proper tuning and way better management, so ill see how this goes and if all is well we shall see what it leads to.
|
Re: Pics of the newest project... [FIXED]
damn, the front end is lookin seksy!!!
|
Re: Pics of the newest project... [FIXED]
Blah blah.. you wasted your money.. blah blah.. blah... :-*
jk. Love the front end conversion, looks great. Good luck with turbocharging it :D |
Re: Pics of the newest project... [FIXED]
Originally Posted by SinisterCRX
Blah blah.. you wasted your money.. blah blah.. blah... :-*
jk. Love the front end conversion, looks great. Good luck with turbocharging it :D |
Re: Pics of the newest project... [FIXED]
nice like that
|
Re: Pics of the newest project... [FIXED]
Originally Posted by turboDA6
Originally Posted by SinisterCRX
Blah blah.. you wasted your money.. blah blah.. blah... :-*
jk. Love the front end conversion, looks great. Good luck with turbocharging it :D |
Re: Pics of the newest project... [FIXED]
nice :P
|
Re: Pics of the newest project... [FIXED]
Nice, another 240SX owner in the mix. I love the front end, been wanting to put that on my car for a while, I think it looks better on the coupe, but I would rock it on my hatch. Anyway, car looks really clean, keep us updated.
|
Re: Pics of the newest project... [FIXED]
i like that lip on the conversion but i loves me some flip lights O0 nice 240
|
Re: Pics of the newest project... [FIXED]
Pretty nice, but I personally prefer the pop up lights.
Good luck with your boost project. |
Re: Pics of the newest project... [FIXED]
Originally Posted by ZC4ME
Nice, another 240SX owner in the mix. I love the front end, been wanting to put that on my car for a while, I think it looks better on the coupe, but I would rock it on my hatch. Anyway, car looks really clean, keep us updated.
oh and that lip is jus the stock single cam lip. like 6 bolts line up n jus make 3 of ur own and bam. it fits on the dualcam bumper to but sits hella hella low. |
Re: Pics of the newest project... [FIXED]
Originally Posted by turboDA6
Originally Posted by ZC4ME
Nice, another 240SX owner in the mix. I love the front end, been wanting to put that on my car for a while, I think it looks better on the coupe, but I would rock it on my hatch. Anyway, car looks really clean, keep us updated.
oh and that lip is jus the stock single cam lip. like 6 bolts line up n jus make 3 of ur own and bam. it fits on the dualcam bumper to but sits hella hella low. |
Re: Pics of the newest project... [FIXED]
KA-T>*
I've run mine upto 17psi >:D |
Re: Pics of the newest project... [FIXED]
Originally Posted by SloS13
KA-T>*
I've run mine upto 17psi >:D |
Re: Pics of the newest project... [FIXED]
in japan...thats called a sil80. 180sx + a silvia front end. guess in the states its a sil40. :P
ssssssssssseeeeeeeeeeeeexxxxxxxxxxxxxxyyyyyyyyyyyy yy |
Re: Pics of the newest project... [FIXED]
Originally Posted by junkyard racer
in japan...thats called a sil80. 180sx + a silvia front end. guess in the states its a sil40. :P
ssssssssssseeeeeeeeeeeeexxxxxxxxxxxxxxyyyyyyyyyyyy yy |
Re: Pics of the newest project... [FIXED]
nice. that front is sexy
|
Re: Pics of the newest project... [FIXED]
nice, what turbo do u plan on useing? my friend has a 240 with a silvia front, they look pretty good, his is ka turbo with safc hack and ----, t3, and ---- running 10psi daily, he made his own manifold from mcmaster piping, just a log, but it works good. he wants to run mega squirt soon. u should be fine with your setup, keep us posted with pics of it as u get ready to turbo and what not, i would tell u i could make a manifold for a 240, but i havent tryed one yet llol, mostly hondas, and a few dsm's. i dont like the ka flange pattern, they should touch not be all induvidual like that.
|
Re: Pics of the newest project... [FIXED]
Originally Posted by SloS13
KA-T>*
I've run mine upto 17psi >:D |
Re: Pics of the newest project... [FIXED]
Originally Posted by ZC4ME
Originally Posted by SloS13
KA-T>*
I've run mine upto 17psi >:D man E-T's can handle some power as well... check out ka-t.org seriously... and converting it to stick is so easy... jus do the petal n ---- first then tackle the conversion after so u dont have to worry bout the pedal. we got it all done in 1 day. and well worth it. to bad my motor took a ---- so im jus gonna toss it and get a fresh ka with low miles for cheap. |
Re: Pics of the newest project... [FIXED]
Originally Posted by turboDA6
Originally Posted by ZC4ME
Originally Posted by SloS13
KA-T>*
I've run mine upto 17psi >:D man E-T's can handle some power as well... check out ka-t.org seriously... and converting it to stick is so easy... jus do the petal n ---- first then tackle the conversion after so u dont have to worry bout the pedal. we got it all done in 1 day. and well worth it. to bad my motor took a ---- so im jus gonna toss it and get a fresh ka with low miles for cheap. I am not at all worried about swapping to the manual trans, just have to get a few more of the parts, hope the $300 parts car deal comes through. I will have to check out ka-t.org anyway, I always like to know what people are doing and how they are doing it. |
Re: Pics of the newest project... [FIXED]
damn that ---- looks hard. Nice work on the almost color matching paint job. It looks like a few more coats of clear and that chit would be flush ^-^
Nice, now you need to bring it up here someday... SoCal crew needs another BBQ. |
Re: Pics of the newest project... [FIXED]
Originally Posted by AgentMurdoc
damn that ---- looks hard. Nice work on the almost color matching paint job. It looks like a few more coats of clear and that chit would be flush ^-^
Nice, now you need to bring it up here someday... SoCal crew needs another BBQ. and its cool that u ordered ur sr20. the only thing you'll wonder about on the 5spd swap is makin sure u get the wiring done right, u needa take a plug off the tranny, cut and jump the 2 wire plug and plug it into the chassis harness... it's pretty simple cuz i had to do it my self. i hated my car when it was auto. |
Re: Pics of the newest project... [FIXED]
Originally Posted by turboDA6
Originally Posted by AgentMurdoc
damn that ---- looks hard. Nice work on the almost color matching paint job. It looks like a few more coats of clear and that chit would be flush ^-^
Nice, now you need to bring it up here someday... SoCal crew needs another BBQ. and its cool that u ordered ur sr20. the only thing you'll wonder about on the 5spd swap is makin sure u get the wiring done right, u needa take a plug off the tranny, cut and jump the 2 wire plug and plug it into the chassis harness... it's pretty simple cuz i had to do it my self. i hated my car when it was auto. |
Re: Pics of the newest project... [FIXED]
Fitment looks good! Time to get it painted :P KA-T... probably not the route I'd take personally but I've read about it being done pretty successfully. Good luck with it.
|
All times are GMT -5. The time now is 12:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands