pics of my 65$ ebay FMIC
the fedex man can today and dropped it off. It alot better than I expected and very heavy compared to my DSM SMIC and DSM FMIC.
Here are the pics http://www2.latech.edu/~njt002/car/teg/IC.jpg http://www2.latech.edu/~njt002/car/teg/ICtop.jpg Thats the best deal I could find on ebay for a new IC that was the size i wanted, it claims to comes with a 2 year warranty. I havnt installed it, but I doubt I will have any problems. Nick |
Re: pics of my 65$ ebay FMIC
Yeah it looks good. Can you post a link I need one.
|
Re: pics of my 65$ ebay FMIC
looks to be the same quality as a JRC or CCA, actually maybe a tad better
looks like my old DRAG model but i would have to be a bit weary of a 65 dollar intecooler |
Re: pics of my 65$ ebay FMIC
yea i was reading about those, i think im gonna get one also, budget intercooler looks good
|
Re: pics of my 65$ ebay FMIC
i forgot to post shipping was 35 dollars... so it was 100 bucks to my door and it was packed properly.
http://cgi.ebay.com/ebaymotors/NEW-B...QQcmdZViewItem |
Re: pics of my 65$ ebay FMIC
not a bad deal at all!
|
Re: pics of my 65$ ebay FMIC
100 shipped jeez if they actually function there goes the us market for intercoolers
|
Re: pics of my 65$ ebay FMIC
wish i would have seen that before i waited a month for my ------ cca.
it says tube n fin in the auction, but it looks like bar n plate... |
Re: pics of my 65$ ebay FMIC
I bought one of those as well.I only buy from ebay for intercoolers as why wait forever to get one that isnt any better and costs more. :-\
|
Re: pics of my 65$ ebay FMIC
I like it. I am going to be looking for a 10x3x31 for my next setup. tube and fin of course. :6
|
Re: pics of my 65$ ebay FMIC
Thanks for the link man. ;D
|
Re: pics of my 65$ ebay FMIC
Originally Posted by WTF
it says tube n fin in the auction, but it looks like bar n plate...
Nick |
Re: pics of my 65$ ebay FMIC
Dam good deal man, I got one like that about a year ago for 200 shipped but its a little bigger, none the less a good deal
|
Re: pics of my 65$ ebay FMIC
----.. someone should get in contact with him and do an hmt group buy..
tell em 80 bucks shipped for say.. 30 people.. |
Re: pics of my 65$ ebay FMIC
Originally Posted by buk9tp
----.. someone should get in contact with him and do an hmt group buy..
tell em 80 bucks shipped for say.. 30 people.. |
Re: pics of my 65$ ebay FMIC
are those 2" inlets? or do you have big ogar hands?
|
Re: pics of my 65$ ebay FMIC
I ran that intercooler and it didnt flow ----.Its rated at like 300 hp and on high boost an ancient greddy core stayed cooler.It is perfect for a low power hmt car.
|
Re: pics of my 65$ ebay FMIC
Originally Posted by NCHATCH
looks to be the same quality as a JRC or CCA, actually maybe a tad better
|
Re: pics of my 65$ ebay FMIC
Originally Posted by Joseph Davis
No, tube/fin > bar/plate.
|
Re: pics of my 65$ ebay FMIC
Why would you think that??
|
Re: pics of my 65$ ebay FMIC
Originally Posted by Joseph Davis
Why would you think that??
|
Re: pics of my 65$ ebay FMIC
Are this guys turbo's any good or are they just ssac crap?
|
Re: pics of my 65$ ebay FMIC
let me do jd's work here. i remember he posted this in a thread a few months ago and so i dug it up:
Originally Posted by Joseph Davis
Tube and fin > bar and plate.
Flow through the core is nothing, surface area for the charge to drag against and make as much contact with as possible so actual heat transferrence takes place is GOD. For the same core size and inlet size, the more efficient IC is the one with the bigger pressure drop.
Originally Posted by Joseph Davis
1) There are two kinds of energy transfer: radiation, and convection. - Radiation is where a subatomic particle carries energy, such as a photon (light), electron (ion), etc. Typically highly charged subatomic particle. Radiation can travel across a vacuum, such as sunlight across the solar system. - Convection is where an actual atom/molecule absorbs heat/energy from rubbing (friction) against another atom/molecule. 2) Radiation is not what is happening in your IC.. therefore it is convection. By definition, this is a product of friction between the charge flowing through your IC and the IC itself. The more friction, the more heat is transferred out of the charge and into the IC. So, yeah, you want to cool the intake charge, or do you want to worry about a pressure drop you'd never bother to measure anyway? Next thing you're going to tell me hp per psi is important. ::) |
Re: pics of my 65$ ebay FMIC
My work here is done. :6
|
Re: pics of my 65$ ebay FMIC
Originally Posted by theebluecrx
I ran that intercooler and it didnt flow ----.Its rated at like 300 hp and on high boost an ancient greddy core stayed cooler.It is perfect for a low power hmt car.
Mr.Davis was correct again Oh and there turbo's are 99 percent sure the same low quality stuff from China Im sorry all you guys are cheap but go to the yards and find some good rebuilt stock turbo's or spend the cash on a brand that is proven |
Re: pics of my 65$ ebay FMIC
Yeah I thought they looked like cheap ----.
|
Re: pics of my 65$ ebay FMIC
CCA 4 LIFE. 8)
|
Re: pics of my 65$ ebay FMIC
Originally Posted by Dmc1
Yeah I thought they looked like cheap ----.
Nick |
Re: pics of my 65$ ebay FMIC
Originally Posted by Dmc1
Thanks for the link man. ;D
so there crap but thanks for the link Follow the crowd much |
Re: pics of my 65$ ebay FMIC
conduction is the transfer of heat by friction of molecules.
convection is the transfer of heat due to movement through the air by which it rises. |
Re: pics of my 65$ ebay FMIC
Originally Posted by chris
so there crap but thanks for the link Follow the crowd much I guess i should have quoted him to make it a little more clear. Keep up flaming all the noobs though it helps weed out idiot's.If noobs weren't flamed this would be honda tech inside of six months. |
Re: pics of my 65$ ebay FMIC
I payed $130 shipped about for this one ($260 total with a manderal bend piping/t clamps/coupler kit)
http://www.hybridka.com/misc/joeavat...ntercooler.jpg it's going on my SOHC ka24e with a t3/t04e .57 trim .63 a/r turbo |
Re: pics of my 65$ ebay FMIC
wo0t wo0t ka24det
thats bad ass it looks like it could chill paris hiltons panties |
Re: pics of my 65$ ebay FMIC
Wow this intercooler is mad cheap! I've been ebay shopping for some for a while and the cheapest I could find is $140 shipped, but this one is a a lot cheaper. I'll be buying it soon too. :y
|
Re: pics of my 65$ ebay FMIC
Originally Posted by SunshineSketches
I payed $130 shipped about for this one ($260 total with a manderal bend piping/t clamps/coupler kit)
http://www.hybridka.com/misc/joeavat...ntercooler.jpg it's going on my SOHC ka24e with a t3/t04e .57 trim .63 a/r turbo |
Re: pics of my 65$ ebay FMIC
look interesting the items from that seller ;D
|
All times are GMT -5. The time now is 02:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands