Other Than Honda Turbo Manifolds...
10-03-2005, 04:47 PM
#1
3.0 BAR
Thread Starter
Join Date: Mar 2005
Posts: 3,161
Other Than Honda Turbo Manifolds...
Short and sweet, does anyone at all, want to or willing or even consider making a turbo manifold for a 97 Dodge Neon ACR with a R/T DOHC engine. It's my boys brother asking me and I promised I'd ask and see if anyone DID have the head flanges or new the set-up or what not. Thanks. Fuel managment is my only real concern, since I rock Uber and don't know much on the FMU styles and non-Honda set-ups. Thanks guys. 
10-03-2005, 04:56 PM
#2
1.5 BAR
Join Date: Feb 2003
Posts: 828
Re: Other Than Honda Turbo Manifolds...
You should be able to swap a turbo with manifold(they are cast as one piece) from a SRT-4 Neon. You can get one from www.srtforums.com or www.socalsrt.com from the guys upgrading to the stage two setups with larger units.
10-03-2005, 07:21 PM
#4
3.0 BAR
Join Date: Jul 2004
Posts: 4,029
Re: Other Than Honda Turbo Manifolds...
Doesn't Hahn racecraft or whatever make turbo manifolds etc for Neons?My local tuner/dyno guy has a Neon[98] he's building.He is using a Hahn manifold,super special 20G turbo,JE pistons,Crower rods,direct port NOS and is running a Autronic SM4 to control it.Claims it will be minimum 500whp goal is 600whp and high 10's 
I didn't realize but Neons actually have quite a bit of potential.You could also use a SAFC or something like a Split Second to control fuel as they are both fairly affordable solutions for management.
Look at this-
http://cgi.ebay.com/ebaymotors/420a-...spagenameZWDVW
I didn't realize but Neons actually have quite a bit of potential.You could also use a SAFC or something like a Split Second to control fuel as they are both fairly affordable solutions for management.Look at this-
http://cgi.ebay.com/ebaymotors/420a-...spagenameZWDVW
10-03-2005, 08:32 PM
#5
3.0 BAR
Thread Starter
Join Date: Mar 2005
Posts: 3,161
Re: Other Than Honda Turbo Manifolds...
Originally Posted by 90dx
Doesn't Hahn racecraft or whatever make turbo manifolds etc for Neons?My local tuner/dyno guy has a Neon[98] he's building.He is using a Hahn manifold,super special 20G turbo,JE pistons,Crower rods,direct port NOS and is running a Autronic SM4 to control it.Claims it will be minimum 500whp goal is 600whp and high 10's I didn't realize but Neons actually have quite a bit of potential.You could also use a SAFC or something like a Split Second to control fuel as they are both fairly affordable solutions for management.
Look at this-
http://cgi.ebay.com/ebaymotors/420a-...spagenameZWDVW
I didn't realize but Neons actually have quite a bit of potential.You could also use a SAFC or something like a Split Second to control fuel as they are both fairly affordable solutions for management.Look at this-
http://cgi.ebay.com/ebaymotors/420a-...spagenameZWDVW
You the man! Don't let anyone tell you otherwise. I still need to look at, well I'll make him do it unless I get paid, at the rest of the fuel management. I don't feel like asking stupid n00b questions. Yes, Rawr, I said the same thing, but it looked if you offset it and had the right angle on the turbo flange it'd be no problem. Pete's is in the rear of the bay, too. Thanks alot 90DX. CCA, I'll look around, unless your sure the srt-4 Neon manifold will fit.
JP
10-04-2005, 02:23 AM
#6
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re: Other Than Honda Turbo Manifolds...
Originally Posted by rawr
have fun with the clearance. theres like 4 inches of it. it can be done but its a hell of a squeese
10-04-2005, 09:42 AM
#8
1.5 BAR
Join Date: Mar 2004
Posts: 938
Re: Other Than Honda Turbo Manifolds...
I just finised an up side down manifold for a 97 dodge neon the other day. its like a ram horn but up side down. So the turbo will sit on top behind the engine.
I have it sitting on a bench at the shop, ill take some pics.
I have it sitting on a bench at the shop, ill take some pics.
10-04-2005, 01:33 PM
#9
3.0 BAR
Thread Starter
Join Date: Mar 2005
Posts: 3,161
Re: Other Than Honda Turbo Manifolds...
Originally Posted by 98ctr
I just finised an up side down manifold for a 97 dodge neon the other day. its like a ram horn but up side down. So the turbo will sit on top behind the engine.
I have it sitting on a bench at the shop, ill take some pics.
I have it sitting on a bench at the shop, ill take some pics.
Top mount? Isn't that the same thing, a ramhorn upside down? Not being cocky I'm just asking. Oh yea, your my hero.
LOL.JP
10-04-2005, 08:47 PM
#10
1.5 BAR
Join Date: Mar 2004
Posts: 938
Re: Other Than Honda Turbo Manifolds...
Originally Posted by samson
Originally Posted by 98ctr
I just finised an up side down manifold for a 97 dodge neon the other day. its like a ram horn but up side down. So the turbo will sit on top behind the engine.
I have it sitting on a bench at the shop, ill take some pics.
I have it sitting on a bench at the shop, ill take some pics.
Top mount? Isn't that the same thing, a ramhorn upside down? Not being cocky I'm just asking. Oh yea, your my hero.
LOL.JP
