Offical HMT 1/4 Mile Times Post
#101
Re:1/4 Mile Times Post....
2002 WRX
Up-pipe, downpipe, catback, shortram intake
13.9 @95mph
In Florida around 80* weather.
Kinda sucks, but it is a heavy pig
1988 Civic Hatch
SOHC Vtec ZC N/A
I/H/E
before the turbo
16.1 with G-tech
Up-pipe, downpipe, catback, shortram intake
13.9 @95mph
In Florida around 80* weather.
Kinda sucks, but it is a heavy pig
1988 Civic Hatch
SOHC Vtec ZC N/A
I/H/E
before the turbo
16.1 with G-tech
#103
Re:1/4 Mile Times Post....
89 crx hf fully gutted
91 d16a6 w/180k(stock longblock)
91 l3 si tranny w/open diff
volvo garrett t3 .48ex,.42 comp. .50 trim comp. wheel
std manifold w/bmc adapter plate and 1/2inch spacer
ps9 ecu w/turbo edit
dsm 450's and bov
walbo 255(not hp)
tunertoys oil supply
saab viggen intercooler
lenso 13x7.5 w/m&h 22x8x13
coat hanger t-bolts
bic pen couplers
aerosol can charge piping
oh yeah 11psi spiking to 13/14 sometimes.....
60'...........2.126
330..........5.718
1/8..........8.588
mph.........85.98
1000........11.067
1/4..........13.146
mph........107.91
http://www.pgmfi.org/~blundar/tony/p1010078.jpg
http://www.pgmfi.org/~blundar/tony/p1010079.jpg
http://www.pgmfi.org/~blundar/tony/p1010077.jpg
http://www.pgmfi.org/~blundar/tony/p1010080.jpg
http://www.pgmfi.org/~blundar/tony/p1010081.jpg
http://www.pgmfi.org/~blundar/tony/p1010083.jpg
91 d16a6 w/180k(stock longblock)
91 l3 si tranny w/open diff
volvo garrett t3 .48ex,.42 comp. .50 trim comp. wheel
std manifold w/bmc adapter plate and 1/2inch spacer
ps9 ecu w/turbo edit
dsm 450's and bov
walbo 255(not hp)
tunertoys oil supply
saab viggen intercooler
lenso 13x7.5 w/m&h 22x8x13
coat hanger t-bolts
bic pen couplers
aerosol can charge piping
oh yeah 11psi spiking to 13/14 sometimes.....
60'...........2.126
330..........5.718
1/8..........8.588
mph.........85.98
1000........11.067
1/4..........13.146
mph........107.91
http://www.pgmfi.org/~blundar/tony/p1010078.jpg
http://www.pgmfi.org/~blundar/tony/p1010079.jpg
http://www.pgmfi.org/~blundar/tony/p1010077.jpg
http://www.pgmfi.org/~blundar/tony/p1010080.jpg
http://www.pgmfi.org/~blundar/tony/p1010081.jpg
http://www.pgmfi.org/~blundar/tony/p1010083.jpg
#104
Re:1/4 Mile Times Post....
This was the best pass with my old 91 Gs-T.Mods were 14b(car was auto)450cc injectors,2 1/2 downpipe,K&N,removed egr,11 lbs,and brake boosting.I lost the slip when i wrecked shortafter.My best time was 15.3@93Mph.Not bad for a auto.
#105
#107
Guest
Posts: n/a
Re:1/4 Mile Times Post....
15.96@88 in 1/4 comkpletley stock d16z6 hooking good, have not run it at the track since the turbo install, hoping to bring it down to mid 15's atleast, gotta get some weight off first though, i have about 200lbs atleast to drop off the car before i go again
#109
Re:1/4 Mile Times Post....
2.3 60'
9.3 @ 83mph (<-- obvious traction problems.. 83mph should be mid 8s...)
1/8 mile
d16y7/z6 mini
comp 59300 cam
14B @ 10psi
open downpipe
91 DX hatch
13" chrome spoked fatties with some gay autocross tires. spun through 1st and 2nd
9.3 @ 83mph (<-- obvious traction problems.. 83mph should be mid 8s...)
1/8 mile
d16y7/z6 mini
comp 59300 cam
14B @ 10psi
open downpipe
91 DX hatch
13" chrome spoked fatties with some gay autocross tires. spun through 1st and 2nd
#110
Re:1/4 Mile Times Post....
95 cx with z6 swap
cx mani-t25
vafc with dsm 450s untuned just a base map
10 psi daily
In the 8's with enough trap speed to make it deep in the 8's but traction is a bitch. beaten a impreza wagon with a wrx swap, a 350z, ls/vtec with spray, a drag gen 3 turbo kitted ex, and will be racing my friends 15 psi miata and am looking for the ls/vtec turbo EF hatch, and b20vtec turbo EG hatch.
In the meantime I'm woking on gettin the drag gen manifold and t3/t4 on the OBD1 min-me sleeper 91 CRX DX I've been working on.
cx mani-t25
vafc with dsm 450s untuned just a base map
10 psi daily
In the 8's with enough trap speed to make it deep in the 8's but traction is a bitch. beaten a impreza wagon with a wrx swap, a 350z, ls/vtec with spray, a drag gen 3 turbo kitted ex, and will be racing my friends 15 psi miata and am looking for the ls/vtec turbo EF hatch, and b20vtec turbo EG hatch.
In the meantime I'm woking on gettin the drag gen manifold and t3/t4 on the OBD1 min-me sleeper 91 CRX DX I've been working on.