Guy-Fast

So are these things holding up. I really need something for the drag car and the more I think about it a welded diff and snapping an axle with the welded diff just doesnt seem like a smart or safe choice.

AgentMurdoc

not first hand, but 1.5 hand i suppose, haha. it works, but don't expect anything like a quaife. but can't complain with the price. It was pulled out though for an upgrade. Application was a drag car with an H2B.

90dx

Used a couple now and they work perfect.Good idea to strip it down and reassemble with upgraded Beleville washers and re tourqe etc.You can order new washers from this guy rich_bryant_is@yahoo.com and the write up is http://www.marcuccimotorsports.com/j...eplacement.pdf or the honda tech one at http://www.honda-tech.com/zerothread?id=1752849&page=1.They are a good unit and i will never buy a Quaife as the OBX works exactly the same and is not $500 overpriced.There is no way a diff the size of a something from a ATV should cost more then a third member for a 9"

The Milk Man

Been using mine for well over 6 months with no complants. I'm only pushing a little over 200hp, but live in the mtns, and have gone to the drag strip a couple of times. Also, I have a friend with a DA pushing 400hp, also with no issues. I think they got the new units fiqured out, just don't buy an older one.

SDRAWKCAB

from what iv read and herd the main problem is that you just have to fix the washer problem and clean the insides torque them down to spec. Im buying one when i finish my vitara build.

rexsk8er

----, i bought one about 2 years ago and threw it in w/o the washer bs just how it came and i havnt had a problem yet. itll leave 2 black marks for a good 50 feet. im pushin 200whp.


whats with the replacement of those washers? i mean, whats the reason they need replaceing :edit nvm, i read the pdf file and its answered there.

92 4doorsleeper

Been using it over a year now.. 2 trannies later the diff still work fine.

Bone1

475 WHP going thru a 1st generation OBX, no complaints in 2.5 years he's been running it.

Number 15 should be installed this week, number 14 and 15 have been 3rd generation 9200's

Number 14 from ebay sellet Tuning Depot, $378 shipped



Number 15 from ebay seller hracing1234



$350 shipped off HondaTech.......end of page 3, then page 4 and 5

http://honda-tech.com/zerothread?id=1962959

Guy-Fast

Thanks bone Im trusting you on this topic has I think you have more hands on experince than anyone with this stuff. Dan Phan more OG hybrid name dropping said he will beat any advertised price for me. Thanks for the link.

Bone1

DP selling OBX's?

please tell me he's the man behind ERZPerformance on HT or Ebay seller hracing1234.


PS: Glad I didn't have those thinner shims made, I'd be out $3500 right now.